2 Replies Latest reply on Sep 19, 2018 9:03 AM by baln@hotmail.com

    Add iPXE support for Connectx-3-Pro MT27520




      I use connect-3-pro cards on hp machines to boot via ipxe but getting attached errors. Apparently, the iPXE does not support connect-3-pro cards. just wondering is there any chance to add ipxe support for the cards.





        • Re: Add iPXE support for Connectx-3-Pro MT27520
          This message was posted by Yair Ifergan on behalf of Martijn van Breugel

          Hi Bal,

          Thank you for posting your question on the Mellanox Community.

          Based on the information provided, you maybe running an outdated version of Flexboot/UEFI on your ConnectX-3 Pro.

          Please open a Mellanox Support so you can request the latest available version applicable for your ConnectX-3 Pro.


          Thanks and regards,
          ~Mellanox Technical Support

            • Re: Add iPXE support for Connectx-3-Pro MT27520

              Here is the fw details of the card. I think those are the latest.


              flint -d /dev/mst/mt4103_pciconf0 q

              Image type:            FS2

              FW Version:            2.42.5000

              FW Release Date:       5.9.2017

              Product Version:

              Rom Info:              version_id=8025 type=CLP

                                     type=UEFI version=14.11.45 cpu=AMD64

                                     type=PXE version=3.4.752

              Device ID:             4103

              Description:           Node             Port1            Port2            Sys image

              GUIDs:                 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff

              MACs:                                       70106fa0f9b0     70106fa0f9b1


              PSID:                  HP_2240110004