1 Reply Latest reply on Sep 18, 2018 12:02 AM by stavs

    Small redundant MLAG setup

    cominog

      Hi there,

       

      first of all thanks for all the great information that can be found here.

       

      I'm trying to build a fully redundant setup for two racks in different locations with the smallest amount of switches. From my understanding MLAG will help me to keep redundancy towards the servers. That means for each rack:

      • use two switches to create a mlag domain
      • attach all servers to both switches.

      So I need at least 4 switches. Now to my problem. I want to avoid another two spine switches. For my setup (two racks) this seems be a little overpowered and the spines would only use 4-6 ports each. The question mark in the picture shows where the magic must happen.

      mlag.png

      Looking at other posts I see the following option.

      • With MLNX-OS 3.6.6102 STP and MLAG can coexist.
      • I implement a fully redundant interconnect of all 4 switches. 
      • I activate MSTP (as I have multiple VLANs)
      • MSTP will allow to utilize interconnection as good as possible

      Is this ok or am I missing something?

       

      Thanks in advance.

        • Re: Small redundant MLAG setup
          stavs

          Hi, the best practice in this case is to connect the switches to each other and configure MPOs between them, this way all of the links will be active.

          Add all ports between the switches into the same mlag-port-channel on each of the mlag pairs.

           

          Logically it will act as bellow: