2 Replies Latest reply on Feb 7, 2018 11:27 PM by levh

    Main adapter information in Windows by CLI

    levh

      How can I get main adapter information like type/model, HW version, FW version from command line in Windows Windows Server 2016

        • Re: Main adapter information in Windows by CLI
          toddh

          You need to have the Windows drivers installed - WinOF.

           

          You want to run vstat.exe from a command prompt.

           

          C:\>vstat.exe

           

                  hca_idx=0

                  uplink={BUS=PCI_E Gen2, SPEED=5.0 Gbps, WIDTH=x8, CAPS=5.0*x8}

                  MSI-X={ENABLED=1, SUPPORTED=128, GRANTED=10, ALL_MASKED=N}

                  vendor_id=0x02c9

                  vendor_part_id=26428

                  hw_ver=0xb0

                  fw_ver=2.10.0720

                  PSID=MT_0FC0110009

                  node_guid=0002:c903:0050:4170

                  num_phys_ports=2

                          port=1

                          port_guid=0002:c903:0050:4171

                          port_state=PORT_ACTIVE (4)

                          link_speed=10.00 Gbps

                          link_width=4x (2)

                          rate=40.00 Gbps

                          real_rate=32.00 Gbps (QDR)

                          port_phys_state=LINK_UP (5)

                          active_speed=10.00 Gbps

                          sm_lid=0x0001

                          port_lid=0x000d

                          port_lmc=0x0

                          transport=IB

                          max_mtu=4096 (5)

                          active_mtu=4096 (5)

                          GID[0]=fe80:0000:0000:0000:0002:c903:0050:4171

           

                          port=2

                          port_guid=0002:c903:0050:4172

                          port_state=PORT_ACTIVE (4)

                          link_speed=10.00 Gbps

                          link_width=4x (2)

                          rate=40.00 Gbps

                          real_rate=32.00 Gbps (QDR)

                          port_phys_state=LINK_UP (5)

                          active_speed=10.00 Gbps

                          sm_lid=0x0001

                          port_lid=0x0016

                          port_lmc=0x0

                          transport=IB

                          max_mtu=4096 (5)

                          active_mtu=4096 (5)

                          GID[0]=fe80:0000:0000:0000:0002:c903:0050:4172

            • Re: Main adapter information in Windows by CLI
              levh

              Thank you T Hunter

              I got an additional tips from the support and chose to use 

              - mlxburn to get read only section parameters and

              - ibv_devinfo to get fw version

              Here is the output I got:

               

              VPD-KEYWORD    DESCRIPTION             VALUE                    

                -----------    -----------             -----                    

              Read Only Section:

               

               

                PN             Part Number             MCX312B-XCCT             

                EC             Revision                AA                       

                SN             Serial Number           MT1734X02126             

                V0             Misc Info               PCIe Gen3 x8             

                RV             Checksum Complement     0x65                     

                IDTAG          Board Id                CX312B - ConnectX-3 Pro SFP+

               

               

              hca_id: ibv_device0

              fw_ver: 2.40.5030

              node_guid: ec0d:9a03:001a:8350

              sys_image_guid: ec0d:9a03:001a:8350

              vendor_id: 0x02c9

              vendor_part_id: 4103

              hw_ver: 0x0

              phys_port_cnt: 2

              port: 1

              state: PORT_DOWN (1)

              max_mtu: 2048 (4)

              active_mtu: 256 (1)

              sm_lid: 0

              port_lid: 0

              port_lmc: 0x00

              transport: RoCE v2.0

               

               

              port: 2

              state: PORT_DOWN (1)

              max_mtu: 2048 (4)

              active_mtu: 256 (1)

              sm_lid: 0

              port_lid: 0

              port_lmc: 0x00

              transport: RoCE v2.0