3 Replies Latest reply on Jul 28, 2017 11:49 AM by cn5hb5

    Waiting for link-up on net0...

    cn5hb5

      I've seen several of my Inifiband card hang at this error. Can you tell me if this is a bug or configuration issue:

      This is installed in a HP G9 Proliant server. I'm attempting to pxe boot off of net1.

       

      Attempting Boot From NIC

      MLNX FlexBoot 3.4.225 (PCI 04:00.0) starting execution...ok

      MLNX FlexBoot 3.4.225 initializing devices...

      Initialization complete

       

       

       

       

      Mellanox ConnectX FlexBoot v3.4.225

      iPXE 1.0.0+ -- Open Source Network Boot Firmware --

      Waiting for link-up on net0...

       

      2017-07-20 15_18_46-dev10549.prn2.facebook.com _home_dtse.png

        • Re: Waiting for link-up on net0...
          rage@mellanox.com

          Hello David,

           

          Correct me if wrong: your issue is that pxe-boot process is not trying/attempted on port net1 because it's stuck at port net0?

           

          Can you going to flexboot menu of good and bad server after reboot by pressing  Ctrl-B and share comparison.

           

           

          Cheers,

          ~Rage

            • Re: Waiting for link-up on net0...
              cn5hb5

              You are correct. I'm attempting to pxe boot off of net1 but not because its stuck at net0. I'm required to use net1. But I cannot get passed net0.

               

              I'm unable to get get into the mellanox configuration screen on the bad server since im going through the HP ILO console. I will update the thread if I can.

               

              Here is a screenshot of the good server:

               

              2017-07-21 13_40_17-dev10549.prn2.facebook.com _home_dtse.png

              2017-07-21 13_40_47-dev10549.prn2.facebook.com _home_dtse.png

                • Re: Waiting for link-up on net0...
                  cn5hb5

                  Issue is fixed. Upgraded the MLX drivers to fw-ConnectX3Pro-rel-2_40_5030-764285-B21_Ax-CLP-8025-UEFI-14.11.34-FlexBoot-3.4.746.bin

                  The issue is fixed in FlexBoot 3.4.746.

                   

                  In the below image i'm not pxebooting but booting from disk. You can see that it no  longer hangs at net0.

                  2017-07-28 11_48_18-2017-07-28 11_44_57-dev10549.prn2.facebook.com _home_dtse-cut.png