1 Reply Latest reply on Jun 30, 2017 1:02 PM by cduced

    SuperMicro fails to boot with ConnectX-3 Pro EN - AHCI issue


      Have a new SuperMicro server that fails to boot when it has a new ConnectX-3 Pro EN card in it.  The sever hangs during the "DXE--Onboard AHCI Device Detection" phase of the boot.

      A couple of things I have tried:


      1. Put the card in another server to update the ConnectX-3 Pro EN firmware:  2.40.5000 --> 2.40.7000
      2. Went into FlexBoot and tried to disable booting from the nic (for both ports): 
        Set the legacy boot protocol to None
        Disabled all the iSCSI general parameters


      Any other things I can try?  Thanks. Bud