3 Replies Latest reply on Apr 24, 2017 7:08 AM by aviap

    Mellanox 100G CX456A not autoconfiguring link local ipv6 address



      I am using CX456A Mellanox 100G cards. I have two cards. in one card Link local address is configuring after boot automatically.

      But on other card it is not happening. Any configuration parameter need to set ?


      enp9s0f0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500

              inet6 fe80::e61d:2dff:fea3:aca4  prefixlen 64  scopeid 0x20<link>

              ether e4:1d:2d:a3:ac:a4  txqueuelen 1000  (Ethernet)

              RX packets 0  bytes 0 (0.0 B)