4 Replies Latest reply on Feb 20, 2017 5:12 PM by sophie

    HPE 5950 and 100Gb nics not reaching 100Gb

    edwardb

      Hi All,

           I have a HPE 5950 with the dual port 100Gb nics.  When I connect to the switch I only get 40Gb (as reported by the switch and bandwidth testing).  I am running RHEL7.1 with the following drivers and fw:

      MLNX_OFED_LINUX-3.4-1.0.0.0-rhel7.1-x86_64

      fw-ConnectX4-rel-12_17_1010-825111-B21_Ax_Bx-UEFI-14.11.28-FlexBoot-3.4.903

      Any hints on getting to 100Gb would be greatly appreciated.

      Ed