5 Replies Latest reply on Sep 11, 2016 7:48 PM by douraku

    'State: Initializing' but works

    douraku

      Hi all,

       

      I am linking 2 identical nodes with 2 IB cables (2 ports are in different subnet). I found the port 2 state is in 'Initializing' (till yesterday, both port status were Active).

      Subnet manager is working. I swapped the cables but the port 2 status did not change.

      Further strange things is that both ports are (probably) working normally, because two nodes can communicate through both pairs of ports.

      Does anyone know what is happening?

       

      -------------------------------

      CA 'mlx4_0'

          CA type: MT25408

          Number of ports: 2

          Firmware version: 2.9.1000

          Hardware version: a0

          Node GUID: 0x0008f1040399e550

          System image GUID: 0x0008f1040399e553

          Port 1:

              State: Active

              Physical state: LinkUp

              Rate: 10

              Base lid: 1

              LMC: 0

              SM lid: 1

              Capability mask: 0x0251086a

              Port GUID: 0x0008f1040399e551

              Link layer: InfiniBand

          Port 2:

              State: Initializing

              Physical state: LinkUp

              Rate: 10

              Base lid: 0

              LMC: 0

              SM lid: 0

              Capability mask: 0x02510868

              Port GUID: 0x0008f1040399e552

              Link layer: InfiniBand