3 Replies Latest reply on Mar 28, 2016 11:59 AM by cwh168998

    ISR 9024S-M can not take admin password

    cwh168998

      I have a ISR 9024S-M which can not take admin password. Looks like the partition is fed up by log file. Is there any way to free the partition or how to factory reset it? Please help!

      Here is the screen dump from RS232 console:

      (none) login: admin

      login:

      (none) login:

       

       

      PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51)

       

       

      CPU:   IBM PowerPC 440 Rev. C

      Board: Artesyn Technologies PM/PPC-440gp

             Artesyn Monitor Version 1.5.0

              VCO: 800 MHz

              CPU: 400 MHz

              PLB: 133 MHz

              OPB: 66 MHz

              EPB: 66 MHz

      I2C:   ready

      DRAM:  ECC Init ....Done 128 MB

      FLASH: 64 MB

       

       

      Initializing board as Monarch....

       

       

      Scanning for PCI devices....

      Scanning PCI devices on bus 0

      LOCALE  VEND DEV  REV  BASE0    BASE1    BASE2    BASE3    BASE4    BASE5

      ------- ---- ---- --- -------- -------- -------- -------- -------- --------

      00,0d,0 10b5 9056 ba  80000000 b0800000 80200000 80400000 ........ ........

       

       

      In:    serial

      Out:   serial

      Err:   serial

      Net:   EMAC0, EMAC1

      BEDBUG:ready

      Hit any key to stop autoboot:  0

      => <INTERRUPT>

      => <INTERRUPT>

      => <INTERRUPT>

      => <INTERRUPT>

      => <INTERRUPT>

      => <INTERRUPT>

      => <INTERRUPT>

      =>  nmap -v -sn 192.168.2.0/24 -e ib1

      Usage:

      nm      - memory modify (constant address)

       

       

      => imm 53 90.1

      00000090:I2c read: failed 4

       

       

      Error reading the chip,

      ? 01

      Error writing the chip.

      00000091:I2c read: failed 4

       

       

      Error reading the chip,

      ? 53

      Error writing the chip.

      00000092:I2c read: failed 4

       

       

      Error reading the chip,

      ? 51

      Error writing the chip.

      00000093:I2c read: failed 4

       

       

      Error reading the chip,

      ? 50

      Error writing the chip.

      00000094:I2c read: failed 4

       

       

      Error reading the chip,

      ? => help

      as      - assemble memory

      autoscr - run script from memory

      base    - print or set address offset

      bdinfo  - print Board Info structure

      bootelf - Boot from an ELF image in memory

      bootm   - boot application image from memory

      bootp   - boot image via network using BootP/TFTP protocol

      bootvx  - Boot vxWorks from an ELF image

      bootd   - boot default, i.e., run 'bootcmd'

      break   - set or clear a breakpoint

      cmp     - memory compare

      coninfo - print console devices and informations

      continue- continue from a breakpoint

      cp      - memory copy

      crc32   - checksum calculation

      date    - get/set/reset date & time

      dhcp    - invoke DHCP client to obtain IP/boot params

      ds      - disassemble memory

      echo    - echo args to console

      erase   - erase FLASH memory

      flinfo  - print FLASH memory information

      getdcr  - Get an IBM PPC 4xx DCR's value

      go      - start application at address 'addr'

      help    - print online help

      imd     - i2c memory display

      imm     - i2c memory modify (auto-incrementing)

      inm     - memory modify (constant address)

      imw     - memory write (fill)

      icrc32  - checksum calculation

      iprobe  - probe to discover valid I2C chip addresses

      iloop   - infinite loop on address range

      isdram  - print SDRAM configuration information

      iminfo  - print header information for application image

      irqinfo - print information about IRQs

      loadb   - load binary file over serial line (kermit mode)

      loads   - load S-Record file over serial line

      loop    - infinite loop on address range

      md      - memory display

      mm      - memory modify (auto-incrementing)

      mtest   - simple RAM test

      mw      - memory write (fill)

      next    - single step execution, stepping over subroutines.

      nm      - memory modify (constant address)

      printenv- print environment variables

      protect - enable or disable FLASH write protection

      rarpboot- boot image via network using RARP/TFTP protocol

      rdump   - Show registers.

      reset   - Perform RESET of the CPU

      run     - run commands in an environment variable

      saveenv - save environment variables to persistent storage

      setdcr  - Set an IBM PPC 4xx DCR's value

      setenv  - set environment variables

      sleep   - delay execution for some time

      where   - Print the running stack.

      step    - single step execution.

      tftpboot- boot image via network using TFTP protocol

                     and env variables ipaddr and serverip

      version - print monitor version

      ?       - alias for 'help'

      pci_enum - Enumerates and displays PCI Bus Enumeration Info

      pci_info - Displays PCI Bus Enumeration Info

      prog_i2c - Programs default i2c bootstrap settings

      moninit - Copies PPCBoot monitor into Soldered Flash

      monship - Erases soldered flash, inits environment variables

      initenv - Initializes Board Environment variables

      um      - destructive memory test

      => imm

      Usage:

      imm     - i2c memory modify (auto-incrementing)

       

       

      => where

      Not at a breakpoint

      => version

       

       

      PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51)

      => coninfo

      List of available devices:

      serial   80000003 SIO stdin stdout stderr

      => dhcp

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 0

      BOOTP broadcast 1

      BOOTP broadcast 2

      BOOTP broadcast 3

      BOOTP broadcast 4

      BOOTP broadcast 5

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 6

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 7

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 8

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 9

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 10

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 11

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 12

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 13

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 14

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 15

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

       

       

      Abort

      BOOTP broadcast 16

       

       

      eth_send -1

      Retry count exceeded; starting again

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 17

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 18

       

       

      Retry count exceeded; starting again

      Trying EMAC0

      Waiting for PHY auto negotiation to complete... TIMEOUT !

      Trying EMAC1

      ENET Speed is 100 Mbps - FULL duplex connection

      BOOTP broadcast 19

       

       

      Abort

      => help

      as      - assemble memory

      autoscr - run script from memory

      base    - print or set address offset

      bdinfo  - print Board Info structure

      bootelf - Boot from an ELF image in memory

      bootm   - boot application image from memory

      bootp   - boot image via network using BootP/TFTP protocol

      bootvx  - Boot vxWorks from an ELF image

      bootd   - boot default, i.e., run 'bootcmd'

      break   - set or clear a breakpoint

      cmp     - memory compare

      coninfo - print console devices and informations

      continue- continue from a breakpoint

      cp      - memory copy

      crc32   - checksum calculation

      date    - get/set/reset date & time

      dhcp    - invoke DHCP client to obtain IP/boot params

      ds      - disassemble memory

      echo    - echo args to console

      erase   - erase FLASH memory

      flinfo  - print FLASH memory information

      getdcr  - Get an IBM PPC 4xx DCR's value

      go      - start application at address 'addr'

      help    - print online help

      imd     - i2c memory display

      imm     - i2c memory modify (auto-incrementing)

      inm     - memory modify (constant address)

      imw     - memory write (fill)

      icrc32  - checksum calculation

      iprobe  - probe to discover valid I2C chip addresses

      iloop   - infinite loop on address range

      isdram  - print SDRAM configuration information

      iminfo  - print header information for application image

      irqinfo - print information about IRQs

      loadb   - load binary file over serial line (kermit mode)

      loads   - load S-Record file over serial line

      loop    - infinite loop on address range

      md      - memory display

      mm      - memory modify (auto-incrementing)

      mtest   - simple RAM test

      mw      - memory write (fill)

      next    - single step execution, stepping over subroutines.

      nm      - memory modify (constant address)

      printenv- print environment variables

      protect - enable or disable FLASH write protection

      rarpboot- boot image via network using RARP/TFTP protocol

      rdump   - Show registers.

      reset   - Perform RESET of the CPU

      run     - run commands in an environment variable

      saveenv - save environment variables to persistent storage

      setdcr  - Set an IBM PPC 4xx DCR's value

      setenv  - set environment variables

      sleep   - delay execution for some time

      where   - Print the running stack.

      step    - single step execution.

      tftpboot- boot image via network using TFTP protocol

                     and env variables ipaddr and serverip

      version - print monitor version

      ?       - alias for 'help'

      pci_enum - Enumerates and displays PCI Bus Enumeration Info

      pci_info - Displays PCI Bus Enumeration Info

      prog_i2c - Programs default i2c bootstrap settings

      moninit - Copies PPCBoot monitor into Soldered Flash

      monship - Erases soldered flash, inits environment variables

      initenv - Initializes Board Environment variables

      um      - destructive memory test

      => ds

      Usage:

      ds      - disassemble memory

       

       

      => as

      Usage:

      as      - assemble memory

       

       

      => help

      as      - assemble memory

      autoscr - run script from memory

      base    - print or set address offset

      bdinfo  - print Board Info structure

      bootelf - Boot from an ELF image in memory

      bootm   - boot application image from memory

      bootp   - boot image via network using BootP/TFTP protocol

      bootvx  - Boot vxWorks from an ELF image

      bootd   - boot default, i.e., run 'bootcmd'

      break   - set or clear a breakpoint

      cmp     - memory compare

      coninfo - print console devices and informations

      continue- continue from a breakpoint

      cp      - memory copy

      crc32   - checksum calculation

      date    - get/set/reset date & time

      dhcp    - invoke DHCP client to obtain IP/boot params

      ds      - disassemble memory

      echo    - echo args to console

      erase   - erase FLASH memory

      flinfo  - print FLASH memory information

      getdcr  - Get an IBM PPC 4xx DCR's value

      go      - start application at address 'addr'

      help    - print online help

      imd     - i2c memory display

      imm     - i2c memory modify (auto-incrementing)

      inm     - memory modify (constant address)

      imw     - memory write (fill)

      icrc32  - checksum calculation

      iprobe  - probe to discover valid I2C chip addresses

      iloop   - infinite loop on address range

      isdram  - print SDRAM configuration information

      iminfo  - print header information for application image

      irqinfo - print information about IRQs

      loadb   - load binary file over serial line (kermit mode)

      loads   - load S-Record file over serial line

      loop    - infinite loop on address range

      md      - memory display

      mm      - memory modify (auto-incrementing)

      mtest   - simple RAM test

      mw      - memory write (fill)

      next    - single step execution, stepping over subroutines.

      nm      - memory modify (constant address)

      printenv- print environment variables

      protect - enable or disable FLASH write protection

      rarpboot- boot image via network using RARP/TFTP protocol

      rdump   - Show registers.

      reset   - Perform RESET of the CPU

      run     - run commands in an environment variable

      saveenv - save environment variables to persistent storage

      setdcr  - Set an IBM PPC 4xx DCR's value

      setenv  - set environment variables

      sleep   - delay execution for some time

      where   - Print the running stack.

      step    - single step execution.

      tftpboot- boot image via network using TFTP protocol

                     and env variables ipaddr and serverip

      version - print monitor version

      ?       - alias for 'help'

      pci_enum - Enumerates and displays PCI Bus Enumeration Info

      pci_info - Displays PCI Bus Enumeration Info

      prog_i2c - Programs default i2c bootstrap settings

      moninit - Copies PPCBoot monitor into Soldered Flash

      monship - Erases soldered flash, inits environment variables

      initenv - Initializes Board Environment variables

      um      - destructive memory test

      => flinfo

       

       

      Bank # 1: CFI conformant FLASH (16 x 16)  Size: 16 MB in 128 Sectors

      Erase timeout 4096 ms, write timeout 0 ms, buffer write timeout 1024 ms, buffer

      size 32

        Sector Start Addresses:

      D0000000      D0020000      D0040000      D0060000      D0080000

      D00A0000      D00C0000      D00E0000      D0100000      D0120000

      D0140000      D0160000      D0180000      D01A0000      D01C0000

      D01E0000      D0200000      D0220000      D0240000      D0260000

      D0280000      D02A0000      D02C0000      D02E0000      D0300000

      D0320000      D0340000      D0360000      D0380000      D03A0000

      D03C0000      D03E0000      D0400000      D0420000      D0440000

      D0460000      D0480000      D04A0000      D04C0000      D04E0000

      D0500000      D0520000      D0540000      D0560000      D0580000

      D05A0000      D05C0000      D05E0000      D0600000      D0620000

      D0640000      D0660000      D0680000      D06A0000      D06C0000

      D06E0000      D0700000      D0720000      D0740000      D0760000

      D0780000      D07A0000      D07C0000      D07E0000      D0800000

      D0820000      D0840000      D0860000      D0880000      D08A0000

      D08C0000      D08E0000      D0900000      D0920000      D0940000

      D0960000      D0980000      D09A0000      D09C0000      D09E0000

      D0A00000      D0A20000      D0A40000      D0A60000      D0A80000

      D0AA0000      D0AC0000      D0AE0000      D0B00000      D0B20000

      D0B40000      D0B60000      D0B80000      D0BA0000      D0BC0000

      D0BE0000      D0C00000      D0C20000      D0C40000      D0C60000

      D0C80000      D0CA0000      D0CC0000      D0CE0000      D0D00000

      D0D20000      D0D40000      D0D60000      D0D80000      D0DA0000

      D0DC0000      D0DE0000      D0E00000      D0E20000      D0E40000

      D0E60000      D0E80000      D0EA0000      D0EC0000      D0EE0000

      D0F00000      D0F20000      D0F40000      D0F60000      D0F80000

      D0FA0000      D0FC0000      D0FE0000

       

       

      Bank # 2: CFI conformant FLASH (16 x 16)  Size: 16 MB in 128 Sectors

      Erase timeout 4096 ms, write timeout 0 ms, buffer write timeout 1024 ms, buffer

      size 32

        Sector Start Addresses:

      D1000000      D1020000      D1040000      D1060000      D1080000

      D10A0000      D10C0000      D10E0000      D1100000      D1120000

      D1140000      D1160000      D1180000      D11A0000      D11C0000

      D11E0000      D1200000      D1220000      D1240000      D1260000

      D1280000      D12A0000      D12C0000      D12E0000      D1300000

      D1320000      D1340000      D1360000      D1380000      D13A0000

      D13C0000      D13E0000      D1400000      D1420000      D1440000

      D1460000      D1480000      D14A0000      D14C0000      D14E0000

      D1500000      D1520000      D1540000      D1560000      D1580000

      D15A0000      D15C0000      D15E0000      D1600000      D1620000

      D1640000      D1660000      D1680000      D16A0000      D16C0000

      D16E0000      D1700000      D1720000      D1740000      D1760000

      D1780000      D17A0000      D17C0000      D17E0000      D1800000

      D1820000      D1840000      D1860000      D1880000      D18A0000

      D18C0000      D18E0000      D1900000      D1920000      D1940000

      D1960000      D1980000      D19A0000      D19C0000      D19E0000

      D1A00000      D1A20000      D1A40000      D1A60000      D1A80000

      D1AA0000      D1AC0000      D1AE0000      D1B00000      D1B20000

      D1B40000      D1B60000      D1B80000      D1BA0000      D1BC0000

      D1BE0000      D1C00000      D1C20000      D1C40000      D1C60000

      D1C80000      D1CA0000      D1CC0000      D1CE0000      D1D00000

      D1D20000      D1D40000      D1D60000      D1D80000      D1DA0000

      D1DC0000      D1DE0000      D1E00000      D1E20000      D1E40000

      D1E60000      D1E80000      D1EA0000      D1EC0000      D1EE0000

      D1F00000      D1F20000      D1F40000      D1F60000      D1F80000

      D1FA0000      D1FC0000      D1FE0000

       

       

      Bank # 3: CFI conformant FLASH (16 x 16)  Size: 16 MB in 128 Sectors

      Erase timeout 4096 ms, write timeout 0 ms, buffer write timeout 1024 ms, buffer

      size 32

        Sector Start Addresses:

      D2000000      D2020000      D2040000      D2060000      D2080000

      D20A0000      D20C0000      D20E0000      D2100000      D2120000

      D2140000      D2160000      D2180000      D21A0000      D21C0000

      D21E0000      D2200000      D2220000      D2240000      D2260000

      D2280000      D22A0000      D22C0000      D22E0000      D2300000

      D2320000      D2340000      D2360000      D2380000      D23A0000

      D23C0000      D23E0000      D2400000      D2420000      D2440000

      D2460000      D2480000      D24A0000      D24C0000      D24E0000

      D2500000      D2520000      D2540000      D2560000      D2580000

      D25A0000      D25C0000      D25E0000      D2600000      D2620000

      D2640000      D2660000      D2680000      D26A0000      D26C0000

      D26E0000      D2700000      D2720000      D2740000      D2760000

      D2780000      D27A0000      D27C0000      D27E0000      D2800000

      D2820000      D2840000      D2860000      D2880000      D28A0000

      D28C0000      D28E0000      D2900000      D2920000      D2940000

      D2960000      D2980000      D29A0000      D29C0000      D29E0000

      D2A00000      D2A20000      D2A40000      D2A60000      D2A80000

      D2AA0000      D2AC0000      D2AE0000      D2B00000      D2B20000

      D2B40000      D2B60000      D2B80000      D2BA0000      D2BC0000

      D2BE0000      D2C00000      D2C20000      D2C40000      D2C60000

      D2C80000      D2CA0000      D2CC0000      D2CE0000      D2D00000

      D2D20000      D2D40000      D2D60000      D2D80000      D2DA0000

      D2DC0000      D2DE0000      D2E00000      D2E20000      D2E40000

      D2E60000      D2E80000      D2EA0000      D2EC0000      D2EE0000

      D2F00000      D2F20000      D2F40000      D2F60000      D2F80000

      D2FA0000      D2FC0000      D2FE0000

       

       

      Bank # 4: CFI conformant FLASH (16 x 16)  Size: 16 MB in 128 Sectors

      Erase timeout 4096 ms, write timeout 0 ms, buffer write timeout 1024 ms, buffer

      size 32

        Sector Start Addresses:

      D3000000      D3020000      D3040000      D3060000      D3080000

      D30A0000      D30C0000      D30E0000      D3100000      D3120000

      D3140000      D3160000      D3180000      D31A0000      D31C0000

      D31E0000      D3200000      D3220000      D3240000      D3260000

      D3280000      D32A0000      D32C0000      D32E0000      D3300000

      D3320000      D3340000      D3360000      D3380000      D33A0000

      D33C0000      D33E0000      D3400000      D3420000      D3440000

      D3460000      D3480000      D34A0000      D34C0000      D34E0000

      D3500000      D3520000      D3540000      D3560000      D3580000

      D35A0000      D35C0000      D35E0000      D3600000      D3620000

      D3640000      D3660000      D3680000      D36A0000      D36C0000

      D36E0000      D3700000      D3720000      D3740000      D3760000

      D3780000      D37A0000      D37C0000      D37E0000      D3800000

      D3820000      D3840000      D3860000      D3880000      D38A0000

      D38C0000      D38E0000      D3900000      D3920000      D3940000

      D3960000      D3980000      D39A0000      D39C0000      D39E0000

      D3A00000      D3A20000      D3A40000      D3A60000      D3A80000

      D3AA0000      D3AC0000      D3AE0000      D3B00000      D3B20000

      D3B40000      D3B60000      D3B80000      D3BA0000      D3BC0000

      D3BE0000      D3C00000      D3C20000      D3C40000      D3C60000

      D3C80000      D3CA0000      D3CC0000      D3CE0000      D3D00000

      D3D20000      D3D40000      D3D60000      D3D80000      D3DA0000

      D3DC0000      D3DE0000      D3E00000      D3E20000      D3E40000

      D3E60000      D3E80000      D3EA0000      D3EC0000      D3EE0000

      D3F00000      D3F20000      D3F40000      D3F60000      D3F80000 (RO)

      D3FA0000 (RO) D3FC0000 (RO) D3FE0000 (RO)

      =>

        • Re: ISR 9024S-M can not take admin password
          cwh168998

          PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51)

           

           

          CPU:   IBM PowerPC 440 Rev. C

          Board: Artesyn Technologies PM/PPC-440gp

                 Artesyn Monitor Version 1.5.0

                  VCO: 800 MHz

                  CPU: 400 MHz

                  PLB: 133 MHz

                  OPB: 66 MHz

                  EPB: 66 MHz

          I2C:   ready

          DRAM:  ECC Init ....Done 128 MB

          FLASH: 64 MB

           

           

          Initializing board as Monarch....

           

           

          Scanning for PCI devices....

          Scanning PCI devices on bus 0

          LOCALE  VEND DEV  REV  BASE0    BASE1    BASE2    BASE3    BASE4    BASE5

          ------- ---- ---- --- -------- -------- -------- -------- -------- --------

          00,0d,0 10b5 9056 ba  80000000 b0800000 80200000 80400000 ........ ........

           

           

          In:    serial

          Out:   serial

          Err:   serial

          Net:   EMAC0, EMAC1

          BEDBUG:ready

          Hit any key to stop autoboot:  0

          booting secondary, press ^c to abort

          booting...

          ## Booting image at d0a00000 ...

             Image Name:   Linux Multiboot-Image 2.4.21-pmp

             Created:      2006-08-24  11:41:03 UTC

             Image Type:   PowerPC Linux Multi-File Image (gzip compressed)

             Data Size:    20363540 Bytes = 19886 kB = 19 MB

             Load Address: 00000000

             Entry Point:  00000000

             Contents:

             Image 0:   780651 Bytes = 762 kB = 0 MB

             Image 1: 19582876 Bytes = 19123 kB = 18 MB

             Verifying Checksum ... OK

             Uncompressing Multi-File Image ... OK

             Loading Ramdisk to 06cb1000, end 07f5df9c ... OK

          Linux version 2.4.21-pmppc440-V02 (root@murzim) (gcc version 2.95.4 20010319 (pr

          erelease/franzo/20011204)) #1 Thu Aug 24 14:39:17 IDT 2006

          Artesyn PM/PPC440 Copyright 2003, Artesyn Communication Products, LLC

          On node 0 totalpages: 32768

          zone(0): 4096 pages.

          zone(1): 28672 pages.

          zone(2): 0 pages.

          Kernel command line: console=ttyS0,38400 root=/dev/ram0 rw ip=192.168.0.101:::25

          5.255.255.0:0.0.0.0:eth1:none

          Calibrating delay loop... 599.65 BogoMIPS

          Memory: 108300k available (1336k kernel code, 572k data, 60k init, 0k highmem)

          Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)

          Inode cache hash table entries: 8192 (order: 4, 65536 bytes)

          Mount cache hash table entries: 512 (order: 0, 4096 bytes)

          Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)

          Page-cache hash table entries: 32768 (order: 5, 131072 bytes)

          POSIX conformance testing by UNIFIX

          PCI: Probing PCI hardware

          Linux NET4.0 for Linux 2.4

          Based upon Swansea University Computer Society NET3.039

          Initializing RT netlink socket

          Starting kswapd

          Journalled Block Device driver loaded

          devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

          devfs: boot_options: 0x0

          JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.

          i2c-core.o: i2c core module

          i2c-dev.o: i2c /dev entries driver module

          i2c-core.o: driver i2c-dev dummy driver registered.

          i2c-algo-bit.o: i2c bit algorithm module

          i2c-algo-pcf.o: i2c pcf8584 algorithm module

          i2c-proc.o version 2.6.1 (20010825)

          ST M41T00 Real-Time Clock Driver 0.01 03 Jan 2003

          i2c-core.o: driver m41t00 registered.

          pty: 256 Unix98 ptys configured

          Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

          abled

          ttyS00 at 0xfdeec200 (irq = 0) is a 16550A

          ttyS01 at 0xfdeeb300 (irq = 1) is a 16550A

          IBM gpio driver version 07.25.02

          GPIO #0 at 0xc9070700

          RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

          loop: loaded (max 8 devices)

          init_ppc405_enet(): vtr: ENET driver v1.1

          Zmii bridge in RMII mode

          eth0: Phy @ 0x4, type BCM5221 (0x004061e4)

          Reset ethernet interfaces

          Zmii bridge in RMII mode

          eth1: Phy @ 0x5, type BCM5221 (0x004061e4)

          Reset ethernet interfaces

          Using buffer write method

          Using buffer write method

          Using buffer write method

          Using buffer write method

          Concatenating MTD devices:

          (0): "Flash Bank"

          (1): "Flash Bank"

          (2): "Flash Bank"

          (3): "Flash Bank"

          into device "All Flash Banks"

          Creating 3 MTD partitions on "All Flash Banks":

          0x03500000-0x03f00000 : "Primary Kernel"

          0x00a00000-0x03500000 : "Secondary Kernel"

          0x00000000-0x00a00000 : "Jffs"

          IBM IIC driver

          i2c-dev.o: Registered 'IBM IIC adapter' as minor 0

          i2c-core.o: client [m41t00] registered to adapter [IBM IIC adapter](pos. 0).

          i2c-core.o: adapter IBM IIC adapter registered as adapter 0.

          i2c-dev.o: Registered 'IBM IIC adapter' as minor 1

          i2c-core.o: adapter IBM IIC adapter registered as adapter 1.

          pci_hotplug: PCI Hot Plug PCI Core version: 0.5

          NET4: Linux TCP/IP 1.0 for NET4.0

          IP Protocols: ICMP, UDP, TCP

          IP: routing cache hash table of 1024 buckets, 8Kbytes

          TCP: Hash tables configured (established 8192 bind 8192)

          NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

          Voltaire PPC440 I2C EEPROM Driver 0.02 04 Mar 2004

          i2c-core.o: driver ppc440_i2c_eeprom registered.

          i2c-core.o: client [ppc440_i2c_eeprom] registered to adapter [IBM IIC adapter](p

          os. 1).

          klr_init_module: p_klr_buffer = c6000000

          klr_init_module: ------------------------------------- memory overrun

          Kernel logger buffer is at:0xc6000000, size: 4083, initializing new buffer

          RAMDISK: Compressed image found at block 0

          Freeing initrd memory: 19123k freed

          EXT2-fs warning: checktime reached, running e2fsck is recommended

          VFS: Mounted root (ext2 filesystem).

          Freeing unused kernel memory: 60k init

          init started:  BusyBox v0.60.5 (2006.05.17-12:13+0000) multi-call binary

          Mounting proc file system.

          ibsw-init.sh start...

          Sat Mar 12 20:28:01 UTC 2016

          INSTALL FLAG  0

          starting syslogd & klogd ...

          Starting ISR:                   /usr/voltaire/scripts/ibsw-init.sh: cannot creat

          e /mnt/jffs/nvigor-Mar_12_2016-20_28_01.log: No space left on device

           

           

          (none) login:

            • Re: ISR 9024S-M can not take admin password
              eddie.notz

              Hi James,

               

              Try to login as root and clear some room on the disk:

               

              • Login to the switch as root (default root credentials below unless someone changed them before the switch arrived to your possesion)
                • User: root
                • Pass: br6000
              • Change directory
                • cd /var/www/html/voltaire
              • Delete the following jar files:
                • rm sVolCommon.jar sSmImages.jar sxerces.jar sjviews.jar sgraphlayout.jar sSm.jar
                • Re: ISR 9024S-M can not take admin password
                  cwh168998

                  Dear Eddie Notz,

                        Thank you so much. The password works. I logged in and go  to /mnt/jffs. I found a hug log file and deleted it. Then I run reboot. After reboot the Infiniband switch works perfectly.

                  Here is the screen dump:

                  # cd /mnt

                  # ls

                  jffs  x

                  # cd jffs/

                  # ls

                  nvigor-Apr_14_2013-01_47_48.log  nvigor-Sep_18_2014-20_16_10.log

                  nvigor-Jul_23_2014-18_43_09.log  voltaire

                  nvigor-Jun_13_2011-14_12_55.log

                  # ifconfig

                  # /sbin/ifconfig

                  # rm nvigor-Apr_14_2013-01_47_48.log

                  # ls -l

                  -rw-r--r--    1 root     root         5080 Sep 17  2014 nvigor-Jul_23_2014-18_43

                  _09.log

                  -rw-r--r--    1 root     root        59418 Mar 22  2013 nvigor-Jun_13_2011-14_12

                  _55.log

                  -rw-r--r--    1 root     root     52816131 Nov 18 18:42 nvigor-Sep_18_2014-20_16

                  _10.log

                  drwxr-xr-x    1 root     root            0 Nov 21  2006 voltaire

                  # rm nvigor-Sep_18_2014-20_16_10.log

                  # ls -l

                  -rw-r--r--    1 root     root         5080 Sep 17  2014 nvigor-Jul_23_2014-18_43

                  _09.log

                  -rw-r--r--    1 root     root        59418 Mar 22  2013 nvigor-Jun_13_2011-14_12

                  _55.log

                  drwxr-xr-x    1 root     root            0 Nov 21  2006 voltaire

                  # df

                  Filesystem           1k-blocks      Used Available Use% Mounted on

                  rootfs                   63461     49961     13500  79% /

                  /dev/ram0                63461     49961     13500  79% /

                  /dev/mtdblock2           10240      2532      7708  25% /mnt/jffs

                  # reboot

                  # ibsw-init.sh stop...

                  Thu Mar 17 19:07:16 UTC 2016

                  nvigor.sh stop...

                  Thu Mar 17 19:07:16 UTC 2016

                  /usr/voltaire/scripts/nvigor.sh: /etc/local_profile: No such file or directory

                  umount: /mnt/jffs: Device or resource busy

                  umount: Cannot remount /dev/mtdblock2 read-only

                  umount: /mnt/jffs: Device or resource busy

                  umount: Cannot remount /dev/ram0 read-only

                  umount: /: Device or resource busy

                  umount: Cannot remount /dev/ram0 read-only

                  umount: /: Device or resource busy

                   

                   

                  The system is going down NOW !!

                  Sending SIGTERM to all processes.

                  Please stand by while rebooting the system.

                  Restarting system.

                   

                   

                   

                   

                  PPCBoot 1.1.6 (Nov 16 2004 - 08:21:51)

                   

                   

                  CPU:   IBM PowerPC 440 Rev. C

                  Board: Artesyn Technologies PM/PPC-440gp

                         Artesyn Monitor Version 1.5.0

                          VCO: 800 MHz

                          CPU: 400 MHz

                          PLB: 133 MHz

                          OPB: 66 MHz

                          EPB: 66 MHz

                  I2C:   ready

                  DRAM:  ECC Init ....Done 128 MB

                  FLASH: 64 MB

                   

                   

                  Initializing board as Monarch....

                   

                   

                  Scanning for PCI devices....

                  Scanning PCI devices on bus 0

                  LOCALE  VEND DEV  REV  BASE0    BASE1    BASE2    BASE3    BASE4    BASE5

                  ------- ---- ---- --- -------- -------- -------- -------- -------- --------

                  00,0d,0 10b5 9056 ba  80000000 b0800000 80200000 80400000 ........ ........

                   

                   

                  In:    serial

                  Out:   serial

                  Err:   serial

                  Net:   EMAC0, EMAC1

                  BEDBUG:ready

                  Hit any key to stop autoboot:  0

                  booting secondary, press ^c to abort

                  booting...

                  ## Booting image at d0a00000 ...

                     Image Name:   Linux Multiboot-Image 2.4.21-pmp

                     Created:      2006-08-24  11:41:03 UTC

                     Image Type:   PowerPC Linux Multi-File Image (gzip compressed)

                     Data Size:    20363540 Bytes = 19886 kB = 19 MB

                     Load Address: 00000000

                     Entry Point:  00000000

                     Contents:

                     Image 0:   780651 Bytes = 762 kB = 0 MB

                     Image 1: 19582876 Bytes = 19123 kB = 18 MB

                     Verifying Checksum ... OK

                     Uncompressing Multi-File Image ... OK

                     Loading Ramdisk to 06cb1000, end 07f5df9c ... OK

                  Linux version 2.4.21-pmppc440-V02 (root@murzim) (gcc version 2.95.4 20010319 (pr

                  erelease/franzo/20011204)) #1 Thu Aug 24 14:39:17 IDT 2006

                  Artesyn PM/PPC440 Copyright 2003, Artesyn Communication Products, LLC

                  On node 0 totalpages: 32768

                  zone(0): 4096 pages.

                  zone(1): 28672 pages.

                  zone(2): 0 pages.

                  Kernel command line: console=ttyS0,38400 root=/dev/ram0 rw ip=192.168.0.101:::25

                  5.255.255.0:0.0.0.0:eth1:none

                  Calibrating delay loop... 599.65 BogoMIPS

                  Memory: 108300k available (1336k kernel code, 572k data, 60k init, 0k highmem)

                  Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)

                  Inode cache hash table entries: 8192 (order: 4, 65536 bytes)

                  Mount cache hash table entries: 512 (order: 0, 4096 bytes)

                  Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)

                  Page-cache hash table entries: 32768 (order: 5, 131072 bytes)

                  POSIX conformance testing by UNIFIX

                  PCI: Probing PCI hardware

                  Linux NET4.0 for Linux 2.4

                  Based upon Swansea University Computer Society NET3.039

                  Initializing RT netlink socket

                  Starting kswapd

                  Journalled Block Device driver loaded

                  devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

                  devfs: boot_options: 0x0

                  JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.

                  i2c-core.o: i2c core module

                  i2c-dev.o: i2c /dev entries driver module

                  i2c-core.o: driver i2c-dev dummy driver registered.

                  i2c-algo-bit.o: i2c bit algorithm module

                  i2c-algo-pcf.o: i2c pcf8584 algorithm module

                  i2c-proc.o version 2.6.1 (20010825)

                  ST M41T00 Real-Time Clock Driver 0.01 03 Jan 2003

                  i2c-core.o: driver m41t00 registered.

                  pty: 256 Unix98 ptys configured

                  Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en

                  abled

                  ttyS00 at 0xfdeec200 (irq = 0) is a 16550A

                  ttyS01 at 0xfdeeb300 (irq = 1) is a 16550A

                  IBM gpio driver version 07.25.02

                  GPIO #0 at 0xc9070700

                  RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

                  loop: loaded (max 8 devices)

                  init_ppc405_enet(): vtr: ENET driver v1.1

                  Zmii bridge in RMII mode

                  eth0: Phy @ 0x4, type BCM5221 (0x004061e4)

                  Reset ethernet interfaces

                  Zmii bridge in RMII mode

                  eth1: Phy @ 0x5, type BCM5221 (0x004061e4)

                  Reset ethernet interfaces

                  Using buffer write method

                  Using buffer write method

                  Using buffer write method

                  Using buffer write method

                  Concatenating MTD devices:

                  (0): "Flash Bank"

                  (1): "Flash Bank"

                  (2): "Flash Bank"

                  (3): "Flash Bank"

                  into device "All Flash Banks"

                  Creating 3 MTD partitions on "All Flash Banks":

                  0x03500000-0x03f00000 : "Primary Kernel"

                  0x00a00000-0x03500000 : "Secondary Kernel"

                  0x00000000-0x00a00000 : "Jffs"

                  IBM IIC driver

                  i2c-dev.o: Registered 'IBM IIC adapter' as minor 0

                  i2c-core.o: client [m41t00] registered to adapter [IBM IIC adapter](pos. 0).

                  i2c-core.o: adapter IBM IIC adapter registered as adapter 0.

                  i2c-dev.o: Registered 'IBM IIC adapter' as minor 1

                  i2c-core.o: adapter IBM IIC adapter registered as adapter 1.

                  pci_hotplug: PCI Hot Plug PCI Core version: 0.5

                  NET4: Linux TCP/IP 1.0 for NET4.0

                  IP Protocols: ICMP, UDP, TCP

                  IP: routing cache hash table of 1024 buckets, 8Kbytes

                  TCP: Hash tables configured (established 8192 bind 8192)

                  NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

                  Voltaire PPC440 I2C EEPROM Driver 0.02 04 Mar 2004

                  i2c-core.o: driver ppc440_i2c_eeprom registered.

                  i2c-core.o: client [ppc440_i2c_eeprom] registered to adapter [IBM IIC adapter](p

                  os. 1).

                  klr_init_module: p_klr_buffer = c6000000

                  klr_init_module: ------------------------------------- memory overrun

                  Kernel logger buffer is at:0xc6000000, size: 4083, initializing new buffer

                  RAMDISK: Compressed image found at block 0

                  Freeing initrd memory: 19123k freed

                  EXT2-fs warning: checktime reached, running e2fsck is recommended

                  VFS: Mounted root (ext2 filesystem).

                  Freeing unused kernel memory: 60k init

                  init started:  BusyBox v0.60.5 (2006.05.17-12:13+0000) multi-call binary

                  Mounting proc file system.

                  ibsw-init.sh start...

                  Thu Mar 17 19:07:56 UTC 2016

                  INSTALL FLAG  0

                  starting syslogd & klogd ...

                  Starting ISR:                   ISR-9024 Version: 3.4.5

                   

                   

                  ISR9024S-21c8 login: admin

                  Password:

                  Login incorrect

                   

                   

                  ISR9024S-21c8 login: admin

                  Password:

                  Login incorrect

                   

                   

                  ISR9024S-21c8 login: admin

                  Password:

                  Login incorrect

                  ISR9024S-21c8 login: