5 Replies Latest reply on Jan 5, 2016 4:19 AM by matrix

    mellanox u-boot command prompt password


      What is the password to get into my switch u-boot command prompt???



      U-Boot 2009.01 SX_PPC_M460EX SX_3.2.0330-82 ppc (Dec 20 2012 - 17:53:54)


      CPU:   AMCC PowerPC 460EX Rev. B at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)

             Security/Kasumi support

             Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)

             Internal PCI arbiter disabled

             32 kB I-Cache 32 kB D-Cache

      Board: Mellanox PPC460EX Board

      FDEF:  No

      I2C:   ready

      DRAM:   2 GB (ECC enabled, 333 MHz, CL3)

      FLASH: 16 MB

      NAND:  1024 MiB

      PCI:   Bus Dev VenId DevId Class Int

      PCIE0: link is not up.

      PCIE1: successfully set as root-complex

              01  00  15b3  c738  0c06  00

      Net:   ppc_4xx_eth0, ppc_4xx_eth1

      Reading image settings from EEPROM


      Mellanox MLNX-OS


      Default image: 'SX_PPC_M460EX SX_3.3.4304 2014-01-14 20:31:55 ppc'

      Press Enter to boot this image, or 'Ctrl B' for boot menu


      Booting default image in:  0



      Mellanox MLNX-OS Boot Menu:


      *  1: SX_PPC_M460EX SX_3.3.4304 2014-01-14 20:31:55 ppc

         2: PPC_M460EX 3.4.3002 2015-07-30 20:13:15 ppc

         u: USB menu (if USB device connected) (password required)

         c: Command prompt (password required)




      Enter Password:



      Thanks !