8 Replies Latest reply on Nov 30, 2015 5:29 AM by sm1ly

    dpdk and connectx3 problem

    sm1ly

      hello, I got compiled dpdk-2.1-1.1 from mellanox website

      I got mlnx ofed 3.1 1.0.3

      I trying to start testpmd and got errors

      I using centos 7.1.

       

      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n4

      EAL: Detected lcore 0 as core 0 on socket 0

      EAL: Detected lcore 1 as core 1 on socket 0

      EAL: Detected lcore 2 as core 2 on socket 0

      EAL: Detected lcore 3 as core 3 on socket 0

      EAL: Detected lcore 4 as core 4 on socket 0

      EAL: Detected lcore 5 as core 5 on socket 0

      EAL: Support maximum 128 logical core(s) by configuration.

      EAL: Detected 6 lcore(s)

      EAL: VFIO modules not all loaded, skip VFIO support...

      EAL: Setting up physically contiguous memory...

      EAL: Ask a virtual area of 0x200000 bytes

      EAL: Virtual area found at 0x7ff0c1200000 (size = 0x200000)

      EAL: Ask a virtual area of 0x27c00000 bytes

      EAL: Virtual area found at 0x7ff099400000 (size = 0x27c00000)

      EAL: Ask a virtual area of 0x1000000 bytes

      EAL: Virtual area found at 0x7ff098200000 (size = 0x1000000)

      EAL: Ask a virtual area of 0x3e000000 bytes

      EAL: Virtual area found at 0x7ff05a000000 (size = 0x3e000000)

      EAL: Ask a virtual area of 0x200000 bytes

      EAL: Virtual area found at 0x7ff059c00000 (size = 0x200000)

      EAL: Ask a virtual area of 0x200000 bytes

      EAL: Virtual area found at 0x7ff059800000 (size = 0x200000)

      EAL: Ask a virtual area of 0xf400000 bytes

      EAL: Virtual area found at 0x7ff04a200000 (size = 0xf400000)

      EAL: Ask a virtual area of 0x79800000 bytes

      EAL: Virtual area found at 0x7fefd0800000 (size = 0x79800000)

      EAL: Ask a virtual area of 0x10000000 bytes

      EAL: Virtual area found at 0x7fefc0600000 (size = 0x10000000)

      EAL: Ask a virtual area of 0x200000 bytes

      EAL: Virtual area found at 0x7fefc0200000 (size = 0x200000)

      EAL: Requesting 2048 pages of size 2MB from socket 0

      EAL: TSC frequency is ~3699897 KHz

      EAL: Master lcore 0 is ready (tid=c314f900;cpuset=[0])

      EAL: lcore 1 is ready (tid=bf9e7700;cpuset=[1])

      EAL: lcore 3 is ready (tid=be9e5700;cpuset=[3])

      EAL: lcore 2 is ready (tid=bf1e6700;cpuset=[2])

      EAL: PCI device 0000:01:00.0 on NUMA socket 0

      EAL:   probe driver: 15b3:1003 librte_pmd_mlx4

      PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0" (VF: false)

      PMD: librte_pmd_mlx4: 2 port(s) detected

      PMD: librte_pmd_mlx4: port 1 MAC address is f4:52:14:22:a2:71

      PMD: librte_pmd_mlx4: port 2 MAC address is f4:52:14:22:a2:72

      EAL: PCI device 0000:0a:00.0 on NUMA socket -1

      EAL:   probe driver: 8086:10d3 rte_em_pmd

      EAL:   Not managed by a supported kernel driver, skipped

      Configuring Port 0 (socket 0)

      PMD: librte_pmd_mlx4: 0x8e00e0: TX queues number update: 0 -> 1

      PMD: librte_pmd_mlx4: 0x8e00e0: RX queues number update: 0 -> 1

      PMD: librte_pmd_mlx4: 0x8e00e0: QP creation failure: Invalid argument

      Fail to configure port 0 tx queues

      EAL: Error - exiting with code: 1

        Cause: Start ports failed

        • Re: dpdk and connectx3 problem
          olgas

          Hi,

           

          Please make sure you have follow the instructions in  MLNX_DPDK QSG.

          After OFED installation, configure options mlx4_core log_num_mgm_entry_size=-7 , run /etc/init.d/openibd restart

          Compile DPDK (remove build dir before)

          If you have old FW installed on you  NIC,  make sure new FW was installed during OFED installation - in this case you need to restart you server

           

          Thanks

          Olga

            • Re: dpdk and connectx3 problem
              sm1ly

              we got updated FW.

              we got option

              options mlx4_core log_num_mgm_entry_size=-1

              cause we using vlans.

              and we got errors.

              • Re: dpdk and connectx3 problem
                sm1ly

                I tried compile it with -7. the same result:

                 

                ./build/build/app/test-pmd/testpmd -c 0xf -n 4 -w 0000:01:00.0 -- --rxq=2 --txq=2 -i

                EAL: Detected lcore 0 as core 0 on socket 0

                EAL: Detected lcore 1 as core 1 on socket 0

                EAL: Detected lcore 2 as core 2 on socket 0

                EAL: Detected lcore 3 as core 3 on socket 0

                EAL: Detected lcore 4 as core 4 on socket 0

                EAL: Detected lcore 5 as core 5 on socket 0

                EAL: Support maximum 128 logical core(s) by configuration.

                EAL: Detected 6 lcore(s)

                EAL: VFIO modules not all loaded, skip VFIO support...

                EAL: Setting up physically contiguous memory...

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7caaa00000 (size = 0x200000)

                EAL: Ask a virtual area of 0x28c00000 bytes

                EAL: Virtual area found at 0x7f7c81c00000 (size = 0x28c00000)

                EAL: Ask a virtual area of 0x1000000 bytes

                EAL: Virtual area found at 0x7f7c80a00000 (size = 0x1000000)

                EAL: Ask a virtual area of 0x40000000 bytes

                EAL: Virtual area found at 0x7f7c40800000 (size = 0x40000000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c40400000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c40000000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c3fc00000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c3f800000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c3f400000 (size = 0x200000)

                EAL: Ask a virtual area of 0x1400000 bytes

                EAL: Virtual area found at 0x7f7c3de00000 (size = 0x1400000)

                EAL: Ask a virtual area of 0xa00000 bytes

                EAL: Virtual area found at 0x7f7c3d200000 (size = 0xa00000)

                EAL: Ask a virtual area of 0xe00000 bytes

                EAL: Virtual area found at 0x7f7c3c200000 (size = 0xe00000)

                EAL: Ask a virtual area of 0x1600000 bytes

                EAL: Virtual area found at 0x7f7c3aa00000 (size = 0x1600000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c3a600000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7c3a200000 (size = 0x200000)

                EAL: Ask a virtual area of 0xf800000 bytes

                EAL: Virtual area found at 0x7f7c2a800000 (size = 0xf800000)

                EAL: Ask a virtual area of 0x69000000 bytes

                EAL: Virtual area found at 0x7f7bc1600000 (size = 0x69000000)

                EAL: Ask a virtual area of 0x800000 bytes

                EAL: Virtual area found at 0x7f7bc0c00000 (size = 0x800000)

                EAL: Ask a virtual area of 0x400000 bytes

                EAL: Virtual area found at 0x7f7bc0600000 (size = 0x400000)

                EAL: Ask a virtual area of 0x800000 bytes

                EAL: Virtual area found at 0x7f7bbfc00000 (size = 0x800000)

                EAL: Ask a virtual area of 0x400000 bytes

                EAL: Virtual area found at 0x7f7bbf600000 (size = 0x400000)

                EAL: Ask a virtual area of 0x2800000 bytes

                EAL: Virtual area found at 0x7f7bbcc00000 (size = 0x2800000)

                EAL: Ask a virtual area of 0x800000 bytes

                EAL: Virtual area found at 0x7f7bbc200000 (size = 0x800000)

                EAL: Ask a virtual area of 0x4000000 bytes

                EAL: Virtual area found at 0x7f7bb8000000 (size = 0x4000000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7bb7c00000 (size = 0x200000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7bb7800000 (size = 0x200000)

                EAL: Ask a virtual area of 0xfc00000 bytes

                EAL: Virtual area found at 0x7f7ba7a00000 (size = 0xfc00000)

                EAL: Ask a virtual area of 0x200000 bytes

                EAL: Virtual area found at 0x7f7ba7600000 (size = 0x200000)

                EAL: Requesting 2048 pages of size 2MB from socket 0

                EAL: TSC frequency is ~3699895 KHz

                EAL: Master lcore 0 is ready (tid=ac7db900;cpuset=[0])

                EAL: lcore 1 is ready (tid=a6de7700;cpuset=[1])

                EAL: lcore 2 is ready (tid=a65e6700;cpuset=[2])

                EAL: lcore 3 is ready (tid=a5de5700;cpuset=[3])

                EAL: PCI device 0000:01:00.0 on NUMA socket 0

                EAL:   probe driver: 15b3:1003 librte_pmd_mlx4

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4769: mlx4_pci_devinit(): using driver device index 0

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4791: mlx4_pci_devinit(): checking device "mlx4_0"

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4802: mlx4_pci_devinit(): PCI information matches, using device "mlx4_0" (VF: false)

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4822: mlx4_pci_devinit(): device opened

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4825: mlx4_pci_devinit(): 2 port(s) detected

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4847: mlx4_pci_devinit(): using port 1 (00000001)

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4915: mlx4_pci_devinit(): device flags: IBV_DEVICE_QPG IBV_DEVICE_RSS

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4918: mlx4_pci_devinit(): maximum RSS indirection table size: 256

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4927: mlx4_pci_devinit(): checksum offloading is not supported

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4932: mlx4_pci_devinit(): L2 tunnel checksum offloads are not supported

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4973: mlx4_pci_devinit(): port 1 MAC address is f4:52:14:22:a2:71

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4987: mlx4_pci_devinit(): port 1 ifname is "mlnx0"

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4994: mlx4_pci_devinit(): port 1 MTU is 1500

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:5021: mlx4_pci_devinit(): forcing Ethernet interface up

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4847: mlx4_pci_devinit(): using port 2 (00000002)

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4862: mlx4_pci_devinit(): bad state for port 2: "down" (1)

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4915: mlx4_pci_devinit(): device flags: IBV_DEVICE_QPG IBV_DEVICE_RSS

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4918: mlx4_pci_devinit(): maximum RSS indirection table size: 256

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4927: mlx4_pci_devinit(): checksum offloading is not supported

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4932: mlx4_pci_devinit(): L2 tunnel checksum offloads are not supported

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4973: mlx4_pci_devinit(): port 2 MAC address is f4:52:14:22:a2:72

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4987: mlx4_pci_devinit(): port 2 ifname is "mlnx1"

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4994: mlx4_pci_devinit(): port 2 MTU is 1500

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:5021: mlx4_pci_devinit(): forcing Ethernet interface up

                Interactive-mode selected

                Configuring Port 0 (socket 0)

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:690: dev_configure(): 0x8c3560: TX queues number update: 0 -> 2

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:696: dev_configure(): 0x8c3560: RX queues number update: 0 -> 2

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:3399: rxq_setup(): priv->device_attr.max_qp_wr is 16351

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:3401: rxq_setup(): priv->device_attr.max_sge is 32

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:3066: rxq_setup_qp_rss(): initializing parent RSS queue

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:3412: rxq_setup(): 0x8c3560: QP creation failure: Invalid argument

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:2440: rxq_cleanup(): cleaning up 0x7ffdc3e1cc40

                /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:1939: rxq_free_elts(): 0x7ffdc3e1cc40: freeing WRs

                Fail to configure port 0

                EAL: Error - exiting with code: 1

                  Cause: Start ports failed

                  • Re: dpdk and connectx3 problem
                    olgas

                    Please send the following:

                    1. dmesg output after the failure

                    2. ofed_info -s

                    3. ibv_devinfo

                     

                    What is strange in your case is: 

                    /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4927: mlx4_pci_devinit(): checksum offloading is not supported

                    /root/MLNX_DPDK-2.1_1.1/drivers/net/mlx4/mlx4.c:4932: mlx4_pci_devinit(): L2 tunnel checksum offloads are not supported

                     

                    It is not related to the error but it indicates that something is wrong with the installation/setup - since this should be supported with the versions you are currently working

                      • Re: dpdk and connectx3 problem
                        sm1ly

                        can it be around RT kernel?

                        sending full dmesg. nothing new after errors. and sending all info u ask

                         

                         

                        [    0.000000] CPU0 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.000000] Initializing cgroup subsys cpuset

                        [    0.000000] Initializing cgroup subsys cpuacct

                        [    0.000000] Linux version 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 (root@bot4) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP PREEMPT RT Tue Nov 17 13:27:58 MSK 2015

                        [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 root=UUID=15d7f351-7fbf-49b2-89ea-f7cda0fe5fa4 ro crashkernel=auto rhgb ipv6.disable=1 net.ifnames=0 nosoftlockup intel_idle.max_cstate=0 mce=ignore_ce idle=poll audit=0 nmi_watchdog=0 nowatchdog rd.md.uuid=349eb13e:cff3e8d5:04894333:532a878b systemd.debug LANG=en_US.UTF-8

                        [    0.000000] e820: BIOS-provided physical RAM map:

                        [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable

                        [    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

                        [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bc14afff] usable

                        [    0.000000] BIOS-e820: [mem 0x00000000bc14b000-0x00000000bc430fff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000bc431000-0x00000000bc53efff] ACPI data

                        [    0.000000] BIOS-e820: [mem 0x00000000bc53f000-0x00000000bc762fff] ACPI NVS

                        [    0.000000] BIOS-e820: [mem 0x00000000bc763000-0x00000000bd71bfff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000bd71c000-0x00000000bd71cfff] usable

                        [    0.000000] BIOS-e820: [mem 0x00000000bd71d000-0x00000000bd7a2fff] ACPI NVS

                        [    0.000000] BIOS-e820: [mem 0x00000000bd7a3000-0x00000000bdbdbfff] usable

                        [    0.000000] BIOS-e820: [mem 0x00000000bdbdc000-0x00000000bdff3fff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000bdff4000-0x00000000bdffffff] usable

                        [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved

                        [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

                        [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable

                        [    0.000000] process: using polling idle threads

                        [    0.000000] NX (Execute Disable) protection: active

                        [    0.000000] SMBIOS 2.7 present.

                        [    0.000000] DMI: System manufacturer System Product Name/P9X79 WS, BIOS 4601 03/05/2014

                        [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

                        [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

                        [    0.000000] No AGP bridge found

                        [    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000

                        [    0.000000] MTRR default type: uncachable

                        [    0.000000] MTRR fixed ranges enabled:

                        [    0.000000]   00000-9FFFF write-back

                        [    0.000000]   A0000-BFFFF uncachable

                        [    0.000000]   C0000-CFFFF write-protect

                        [    0.000000]   D0000-E7FFF uncachable

                        [    0.000000]   E8000-FFFFF write-protect

                        [    0.000000] MTRR variable ranges enabled:

                        [    0.000000]   0 base 000000000000 mask 3FFE00000000 write-back

                        [    0.000000]   1 base 000200000000 mask 3FFFC0000000 write-back

                        [    0.000000]   2 base 0000BF000000 mask 3FFFFF000000 uncachable

                        [    0.000000]   3 base 0000C0000000 mask 3FFFC0000000 uncachable

                        [    0.000000]   4 disabled

                        [    0.000000]   5 disabled

                        [    0.000000]   6 disabled

                        [    0.000000]   7 disabled

                        [    0.000000]   8 disabled

                        [    0.000000]   9 disabled

                        [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

                        [    0.000000] original variable MTRRs

                        [    0.000000] reg 0, base: 0GB, range: 8GB, type WB

                        [    0.000000] reg 1, base: 8GB, range: 1GB, type WB

                        [    0.000000] reg 2, base: 3056MB, range: 16MB, type UC

                        [    0.000000] reg 3, base: 3GB, range: 1GB, type UC

                        [    0.000000] total RAM covered: 8176M

                        [    0.000000] Found optimal setting for mtrr clean up

                        [    0.000000]  gran_size: 64K chunk_size: 32M num_reg: 5   lose cover RAM: 0G

                        [    0.000000] New variable MTRRs

                        [    0.000000] reg 0, base: 0GB, range: 2GB, type WB

                        [    0.000000] reg 1, base: 2GB, range: 1GB, type WB

                        [    0.000000] reg 2, base: 3056MB, range: 16MB, type UC

                        [    0.000000] reg 3, base: 4GB, range: 4GB, type WB

                        [    0.000000] reg 4, base: 8GB, range: 1GB, type WB

                        [    0.000000] e820: update [mem 0xbf000000-0xffffffff] usable ==> reserved

                        [    0.000000] e820: last_pfn = 0xbe000 max_arch_pfn = 0x400000000

                        [    0.000000] found SMP MP-table at [mem 0x000fd8f0-0x000fd8ff] mapped at [ffff8800000fd8f0]

                        [    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576

                        [    0.000000] Using GB pages for direct mapping

                        [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

                        [    0.000000]  [mem 0x00000000-0x000fffff] page 4k

                        [    0.000000] BRK [0x01f86000, 0x01f86fff] PGTABLE

                        [    0.000000] BRK [0x01f87000, 0x01f87fff] PGTABLE

                        [    0.000000] BRK [0x01f88000, 0x01f88fff] PGTABLE

                        [    0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]

                        [    0.000000]  [mem 0x23fe00000-0x23fffffff] page 1G

                        [    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]

                        [    0.000000]  [mem 0x23c000000-0x23fdfffff] page 1G

                        [    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]

                        [    0.000000]  [mem 0x200000000-0x23bffffff] page 1G

                        [    0.000000] init_memory_mapping: [mem 0x00100000-0xbc14afff]

                        [    0.000000]  [mem 0x00100000-0x001fffff] page 4k

                        [    0.000000]  [mem 0x00200000-0x3fffffff] page 2M

                        [    0.000000]  [mem 0x40000000-0x7fffffff] page 1G

                        [    0.000000]  [mem 0x80000000-0xbbffffff] page 2M

                        [    0.000000]  [mem 0xbc000000-0xbc14afff] page 4k

                        [    0.000000] init_memory_mapping: [mem 0xbd71c000-0xbd71cfff]

                        [    0.000000]  [mem 0xbd71c000-0xbd71cfff] page 4k

                        [    0.000000] BRK [0x01f89000, 0x01f89fff] PGTABLE

                        [    0.000000] init_memory_mapping: [mem 0xbd7a3000-0xbdbdbfff]

                        [    0.000000]  [mem 0xbd7a3000-0xbd7fffff] page 4k

                        [    0.000000]  [mem 0xbd800000-0xbd9fffff] page 2M

                        [    0.000000]  [mem 0xbda00000-0xbdbdbfff] page 4k

                        [    0.000000] BRK [0x01f8a000, 0x01f8afff] PGTABLE

                        [    0.000000] init_memory_mapping: [mem 0xbdff4000-0xbdffffff]

                        [    0.000000]  [mem 0xbdff4000-0xbdffffff] page 4k

                        [    0.000000] BRK [0x01f8b000, 0x01f8bfff] PGTABLE

                        [    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]

                        [    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G

                        [    0.000000] RAMDISK: [mem 0x35f9a000-0x36fc4fff]

                        [    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)

                        [    0.000000] ACPI: XSDT 00000000bc467070 00054 (v01 ALASKA    A M I 01072009 AMI  00010013)

                        [    0.000000] ACPI: FACP 00000000bc471798 0010C (v05 ALASKA    A M I 01072009 AMI  00010013)

                        [    0.000000] ACPI: DSDT 00000000bc467158 0A640 (v02 ALASKA    A M I 00000016 INTL 20051117)

                        [    0.000000] ACPI: FACS 00000000bc75a080 00040

                        [    0.000000] ACPI: APIC 00000000bc4718a8 000AC (v03 ALASKA    A M I 01072009 AMI  00010013)

                        [    0.000000] ACPI: FPDT 00000000bc471958 00044 (v01 ALASKA    A M I 01072009 AMI  00010013)

                        [    0.000000] ACPI: MCFG 00000000bc4719a0 0003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)

                        [    0.000000] ACPI: HPET 00000000bc4719e0 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)

                        [    0.000000] ACPI: SSDT 00000000bc471a70 CD128 (v02  INTEL    CpuPm 00004000 INTL 20051117)

                        [    0.000000] ACPI: Local APIC address 0xfee00000

                        [    0.000000] No NUMA configuration found

                        [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]

                        [    0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]

                        [    0.000000]   NODE_DATA [mem 0x23ffd7000-0x23fffdfff]

                        [    0.000000] Reserving 161MB of memory at 688MB for crashkernel (System RAM: 8133MB)

                        [    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0

                        [    0.000000] Zone ranges:

                        [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]

                        [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]

                        [    0.000000]   Normal   [mem 0x100000000-0x23fffffff]

                        [    0.000000] Movable zone start for each node

                        [    0.000000] Early memory node ranges

                        [    0.000000]   node   0: [mem 0x00001000-0x0009dfff]

                        [    0.000000]   node   0: [mem 0x00100000-0xbc14afff]

                        [    0.000000]   node   0: [mem 0xbd71c000-0xbd71cfff]

                        [    0.000000]   node   0: [mem 0xbd7a3000-0xbdbdbfff]

                        [    0.000000]   node   0: [mem 0xbdff4000-0xbdffffff]

                        [    0.000000]   node   0: [mem 0x100000000-0x23fffffff]

                        [    0.000000] On node 0 totalpages: 2082094

                        [    0.000000]   DMA zone: 64 pages used for memmap

                        [    0.000000]   DMA zone: 21 pages reserved

                        [    0.000000]   DMA zone: 3997 pages, LIFO batch:0

                        [    0.000000]   DMA32 zone: 11991 pages used for memmap

                        [    0.000000]   DMA32 zone: 767377 pages, LIFO batch:31

                        [    0.000000]   Normal zone: 20480 pages used for memmap

                        [    0.000000]   Normal zone: 1310720 pages, LIFO batch:31

                        [    0.000000] ACPI: PM-Timer IO Port: 0x408

                        [    0.000000] ACPI: Local APIC address 0xfee00000

                        [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

                        [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)

                        [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)

                        [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)

                        [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] enabled)

                        [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] enabled)

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])

                        [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])

                        [    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])

                        [    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

                        [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])

                        [    0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47

                        [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

                        [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

                        [    0.000000] ACPI: IRQ0 used by override.

                        [    0.000000] ACPI: IRQ2 used by override.

                        [    0.000000] ACPI: IRQ9 used by override.

                        [    0.000000] Using ACPI (MADT) for SMP configuration information

                        [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

                        [    0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs

                        [    0.000000] nr_irqs_gsi: 64

                        [    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]

                        [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbc14b000-0xbc430fff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbc431000-0xbc53efff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbc53f000-0xbc762fff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbc763000-0xbd71bfff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbd71d000-0xbd7a2fff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbdbdc000-0xbdff3fff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xbe000000-0xdfffffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1bfff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]

                        [    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]

                        [    0.000000] e820: [mem 0xbe000000-0xdfffffff] available for PCI devices

                        [    0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1

                        [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88023fc00000 s91904 r8192 d22784 u262144

                        [    0.000000] pcpu-alloc: s91904 r8192 d22784 u262144 alloc=1*2097152

                        [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -

                        [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2049538

                        [    0.000000] Policy zone: Normal

                        [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 root=UUID=15d7f351-7fbf-49b2-89ea-f7cda0fe5fa4 ro crashkernel=auto rhgb ipv6.disable=1 net.ifnames=0 nosoftlockup intel_idle.max_cstate=0 mce=ignore_ce idle=poll audit=0 nmi_watchdog=0 nowatchdog rd.md.uuid=349eb13e:cff3e8d5:04894333:532a878b systemd.debug LANG=en_US.UTF-8

                        [    0.000000] audit: disabled (until reboot)

                        [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

                        [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340

                        [    0.000000] Checking aperture...

                        [    0.000000] No AGP bridge found

                        [    0.000000] Memory: 7932212k/9437184k available (6075k kernel code, 1108808k absent, 396164k reserved, 4282k data, 1520k init)

                        [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1

                        [    0.000000] Preemptible hierarchical RCU implementation.

                        [    0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=6.

                        [    0.000000] Experimental no-CBs for all CPUs

                        [    0.000000] Experimental no-CBs CPUs: 0-5.

                        [    0.000000] RCU kthread priority: 2.

                        [    0.000000] NR_IRQS:327936 nr_irqs:1136 16

                        [    0.000000] Console: colour VGA+ 80x25

                        [    0.000000] console [tty0] enabled

                        [    0.000000] allocated 134217728 bytes of page_cgroup

                        [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups

                        [    0.000000] hpet clockevent registered

                        [    0.000000] tsc: Fast TSC calibration using PIT

                        [    0.001000] tsc: Detected 3699.619 MHz processor

                        [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.23 BogoMIPS (lpj=3699619)

                        [    0.000003] pid_max: default: 32768 minimum: 301

                        [    0.000017] Security Framework initialized

                        [    0.000023] SELinux:  Initializing.

                        [    0.000031] SELinux:  Starting in permissive mode

                        [    0.000781] Dentry cache hash table entries: 1048576 (order: 12, 16777216 bytes)

                        [    0.003131] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

                        [    0.003730] Mount-cache hash table entries: 4096

                        [    0.003867] Initializing cgroup subsys memory

                        [    0.003873] Initializing cgroup subsys devices

                        [    0.003874] Initializing cgroup subsys freezer

                        [    0.003875] Initializing cgroup subsys net_cls

                        [    0.003876] Initializing cgroup subsys blkio

                        [    0.003876] Initializing cgroup subsys perf_event

                        [    0.003877] Initializing cgroup subsys hugetlb

                        [    0.003896] CPU: Physical Processor ID: 0

                        [    0.003897] CPU: Processor Core ID: 0

                        [    0.003900] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

                        ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

                        [    0.004607] mce: CPU supports 23 MCE banks

                        [    0.004632] CPU0: Thermal monitoring enabled (TM1)

                        [    0.004632] process: WARNING: polling idle and HT enabled, performance may degrade

                        [    0.004635] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0

                        Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0

                        tlb_flushall_shift: 6

                        [    0.004705] Freeing SMP alternatives: 20k freed

                        [    0.004709] ACPI: Core revision 20130517

                        [    0.022151] ACPI: All ACPI Tables successfully acquired

                        [    0.025951] ftrace: allocating 23124 entries in 91 pages

                        [    0.034362] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

                        [    0.044372] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1660 v2 @ 3.70GHz (fam: 06, model: 3e, stepping: 04)

                        [    0.044375] TSC deadline timer enabled

                        [    0.044387] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.

                        [    0.053719] ... version:                3

                        [    0.053945] ... bit width:              48

                        [    0.054171] ... generic registers:      8

                        [    0.054398] ... value mask:             0000ffffffffffff

                        [    0.054625] ... max period:             0000ffffffffffff

                        [    0.054853] ... fixed-purpose events:   3

                        [    0.055079] ... event mask:             00000007000000ff

                        [    0.083193] CPU1 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.101904] CPU2 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.120611] CPU3 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.139326] CPU4 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.071451] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 OK

                        [    0.158035] CPU5 microcode updated early to revision 0x428, date = 2014-05-29

                        [    0.160859] Brought up 6 CPUs

                        [    0.161316] smpboot: Total of 6 processors activated (44395.42 BogoMIPS)

                        [    0.166325] devtmpfs: initialized

                        [    0.168244] EVM: security.selinux

                        [    0.168470] EVM: security.ima

                        [    0.168695] EVM: security.capability

                        [    0.168973] PM: Registering ACPI NVS region [mem 0xbc53f000-0xbc762fff] (2244608 bytes)

                        [    0.169408] PM: Registering ACPI NVS region [mem 0xbd71d000-0xbd7a2fff] (548864 bytes)

                        [    0.170340] atomic64 test passed for x86-64 platform with CX8 and with SSE

                        [    0.170634] NET: Registered protocol family 16

                        [    0.170998] ACPI: bus type PCI registered

                        [    0.171231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

                        [    0.171495] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

                        [    0.171908] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820

                        [    0.179585] PCI: Using configuration type 1 for base access

                        [    0.180480] ACPI: Added _OSI(Module Device)

                        [    0.180708] ACPI: Added _OSI(Processor Device)

                        [    0.180935] ACPI: Added _OSI(3.0 _SCP Extensions)

                        [    0.181166] ACPI: Added _OSI(Processor Aggregator Device)

                        [    0.186063] ACPI: EC: Look up EC in DSDT

                        [    0.190556] ACPI: Executed 1 blocks of module-level executable AML code

                        [    0.267663] ACPI: Interpreter enabled

                        [    0.267893] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)

                        [    0.268394] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)

                        [    0.268896] ACPI: (supports S0 S3 S4 S5)

                        [    0.269122] ACPI: Using IOAPIC for interrupt routing

                        [    0.269371] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

                        [    0.278251] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])

                        [    0.278488] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

                        [    0.278997] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME AER]

                        [    0.279500] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability]

                        [    0.279950] PCI host bridge to bus 0000:00

                        [    0.280178] pci_bus 0000:00: root bus resource [bus 00-fe]

                        [    0.280410] pci_bus 0000:00: root bus resource [io  0x0000-0x03af]

                        [    0.280639] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7]

                        [    0.280868] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df]

                        [    0.281096] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]

                        [    0.281325] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

                        [    0.281557] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]

                        [    0.281786] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfbffffff]

                        [    0.282024] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000

                        [    0.282078] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold

                        [    0.282129] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400

                        [    0.282193] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

                        [    0.282226] pci 0000:00:01.0: System wakeup disabled by ACPI

                        [    0.282479] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400

                        [    0.282543] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold

                        [    0.282574] pci 0000:00:01.1: System wakeup disabled by ACPI

                        [    0.282824] pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400

                        [    0.282888] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

                        [    0.282920] pci 0000:00:02.0: System wakeup disabled by ACPI

                        [    0.283170] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400

                        [    0.283236] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold

                        [    0.283267] pci 0000:00:03.0: System wakeup disabled by ACPI

                        [    0.283518] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000

                        [    0.283601] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000

                        [    0.283679] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020

                        [    0.283687] pci 0000:00:05.4: reg 0x10: [mem 0xfb726000-0xfb726fff]

                        [    0.283784] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400

                        [    0.283868] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold

                        [    0.283925] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000

                        [    0.283945] pci 0000:00:16.0: reg 0x10: [mem 0xfb725000-0xfb72500f 64bit]

                        [    0.284012] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

                        [    0.284064] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000

                        [    0.284079] pci 0000:00:19.0: reg 0x10: [mem 0xfb700000-0xfb71ffff]

                        [    0.284086] pci 0000:00:19.0: reg 0x14: [mem 0xfb724000-0xfb724fff]

                        [    0.284093] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]

                        [    0.284147] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold

                        [    0.284174] pci 0000:00:19.0: System wakeup disabled by ACPI

                        [    0.284429] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320

                        [    0.284447] pci 0000:00:1a.0: reg 0x10: [mem 0xfb723000-0xfb7233ff]

                        [    0.284526] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

                        [    0.284555] pci 0000:00:1a.0: System wakeup disabled by ACPI

                        [    0.284804] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400

                        [    0.284875] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

                        [    0.284907] pci 0000:00:1c.0: System wakeup disabled by ACPI

                        [    0.285155] pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400

                        [    0.285226] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

                        [    0.285257] pci 0000:00:1c.2: System wakeup disabled by ACPI

                        [    0.285509] pci 0000:00:1c.4: [8086:1d18] type 01 class 0x060400

                        [    0.285580] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

                        [    0.285611] pci 0000:00:1c.4: System wakeup disabled by ACPI

                        [    0.285858] pci 0000:00:1c.5: [8086:1d1a] type 01 class 0x060400

                        [    0.285930] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

                        [    0.285962] pci 0000:00:1c.5: System wakeup disabled by ACPI

                        [    0.286210] pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400

                        [    0.286282] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold

                        [    0.286313] pci 0000:00:1c.7: System wakeup disabled by ACPI

                        [    0.286567] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320

                        [    0.286585] pci 0000:00:1d.0: reg 0x10: [mem 0xfb722000-0xfb7223ff]

                        [    0.286664] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

                        [    0.286694] pci 0000:00:1d.0: System wakeup disabled by ACPI

                        [    0.286939] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

                        [    0.287002] pci 0000:00:1e.0: System wakeup disabled by ACPI

                        [    0.287251] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100

                        [    0.287388] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601

                        [    0.287403] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]

                        [    0.287412] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]

                        [    0.287418] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]

                        [    0.287424] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]

                        [    0.287430] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]

                        [    0.287436] pci 0000:00:1f.2: reg 0x24: [mem 0xfb721000-0xfb7217ff]

                        [    0.287474] pci 0000:00:1f.2: PME# supported from D3hot

                        [    0.287516] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500

                        [    0.287529] pci 0000:00:1f.3: reg 0x10: [mem 0xfb720000-0xfb7200ff 64bit]

                        [    0.287546] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]

                        [    0.287627] pci 0000:00:01.0: PCI bridge to [bus 03]

                        [    0.287901] pci 0000:04:00.0: [10de:0a65] type 00 class 0x030000

                        [    0.287908] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]

                        [    0.287915] pci 0000:04:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]

                        [    0.287922] pci 0000:04:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]

                        [    0.287927] pci 0000:04:00.0: reg 0x24: [io  0xe000-0xe07f]

                        [    0.287932] pci 0000:04:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]

                        [    0.287987] pci 0000:04:00.1: [10de:0be3] type 00 class 0x040300

                        [    0.287994] pci 0000:04:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]

                        [    0.289426] pci 0000:00:01.1: PCI bridge to [bus 04]

                        [    0.289658] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]

                        [    0.289661] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]

                        [    0.289665] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]

                        [    0.289942] pci 0000:01:00.0: [15b3:1003] type 00 class 0x028000

                        [    0.290198] pci 0000:01:00.0: reg 0x10: [mem 0xfb200000-0xfb2fffff 64bit]

                        [    0.290405] pci 0000:01:00.0: reg 0x18: [mem 0xd2800000-0xd2ffffff 64bit pref]

                        [    0.290791] pci 0000:01:00.0: reg 0x30: [mem 0xfb100000-0xfb1fffff pref]

                        [    0.294375] pci 0000:00:02.0: PCI bridge to [bus 01]

                        [    0.294608] pci 0000:00:02.0:   bridge window [mem 0xfb100000-0xfb2fffff]

                        [    0.294612] pci 0000:00:02.0:   bridge window [mem 0xd2800000-0xd2ffffff 64bit pref]

                        [    0.294661] pci 0000:00:03.0: PCI bridge to [bus 02]

                        [    0.294940] pci 0000:00:11.0: PCI bridge to [bus 05]

                        [    0.295218] pci 0000:00:1c.0: PCI bridge to [bus 06]

                        [    0.295515] pci 0000:07:00.0: [1b4b:9130] type 00 class 0x010601

                        [    0.295531] pci 0000:07:00.0: reg 0x10: [io  0xd040-0xd047]

                        [    0.295543] pci 0000:07:00.0: reg 0x14: [io  0xd030-0xd033]

                        [    0.295554] pci 0000:07:00.0: reg 0x18: [io  0xd020-0xd027]

                        [    0.295565] pci 0000:07:00.0: reg 0x1c: [io  0xd010-0xd013]

                        [    0.295576] pci 0000:07:00.0: reg 0x20: [io  0xd000-0xd00f]

                        [    0.295587] pci 0000:07:00.0: reg 0x24: [mem 0xfb610000-0xfb6107ff]

                        [    0.295599] pci 0000:07:00.0: reg 0x30: [mem 0xfb600000-0xfb60ffff pref]

                        [    0.295657] pci 0000:07:00.0: PME# supported from D3hot

                        [    0.298300] pci 0000:00:1c.2: PCI bridge to [bus 07]

                        [    0.298532] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]

                        [    0.298535] pci 0000:00:1c.2:   bridge window [mem 0xfb600000-0xfb6fffff]

                        [    0.298615] pci 0000:08:00.0: [1b21:1042] type 00 class 0x0c0330

                        [    0.298642] pci 0000:08:00.0: reg 0x10: [mem 0xfb500000-0xfb507fff 64bit]

                        [    0.298793] pci 0000:08:00.0: PME# supported from D3hot D3cold

                        [    0.301304] pci 0000:00:1c.4: PCI bridge to [bus 08]

                        [    0.301537] pci 0000:00:1c.4:   bridge window [mem 0xfb500000-0xfb5fffff]

                        [    0.301626] pci 0000:09:00.0: [1b21:1042] type 00 class 0x0c0330

                        [    0.301653] pci 0000:09:00.0: reg 0x10: [mem 0xfb400000-0xfb407fff 64bit]

                        [    0.301804] pci 0000:09:00.0: PME# supported from D3hot D3cold

                        [    0.304307] pci 0000:00:1c.5: PCI bridge to [bus 09]

                        [    0.304541] pci 0000:00:1c.5:   bridge window [mem 0xfb400000-0xfb4fffff]

                        [    0.304633] pci 0000:0a:00.0: [8086:10d3] type 00 class 0x020000

                        [    0.304660] pci 0000:0a:00.0: reg 0x10: [mem 0xfb300000-0xfb31ffff]

                        [    0.304695] pci 0000:0a:00.0: reg 0x18: [io  0xc000-0xc01f]

                        [    0.304713] pci 0000:0a:00.0: reg 0x1c: [mem 0xfb320000-0xfb323fff]

                        [    0.304879] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold

                        [    0.307312] pci 0000:00:1c.7: PCI bridge to [bus 0a]

                        [    0.307545] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]

                        [    0.307548] pci 0000:00:1c.7:   bridge window [mem 0xfb300000-0xfb3fffff]

                        [    0.307609] pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)

                        [    0.307845] pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af] (subtractive decode)

                        [    0.307846] pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7] (subtractive decode)

                        [    0.307847] pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df] (subtractive decode)

                        [    0.307848] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)

                        [    0.307849] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

                        [    0.307850] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)

                        [    0.307851] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfbffffff] (subtractive decode)

                        [    0.308079] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])

                        [    0.308310] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

                        [    0.308739] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]

                        [    0.309176] PCI host bridge to bus 0000:ff

                        [    0.309405] pci_bus 0000:ff: root bus resource [bus ff]

                        [    0.309641] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000

                        [    0.309674] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000

                        [    0.309703] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000

                        [    0.309728] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000

                        [    0.309753] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000

                        [    0.309776] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000

                        [    0.309801] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000

                        [    0.309825] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000

                        [    0.309848] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000

                        [    0.309870] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000

                        [    0.309891] pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000

                        [    0.309914] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000

                        [    0.309937] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000

                        [    0.309960] pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000

                        [    0.309984] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000

                        [    0.310007] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100

                        [    0.310035] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000

                        [    0.310068] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000

                        [    0.310100] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000

                        [    0.310133] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000

                        [    0.310165] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000

                        [    0.310199] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000

                        [    0.310233] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000

                        [    0.310266] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000

                        [    0.310299] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000

                        [    0.310330] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000

                        [    0.310363] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000

                        [    0.310396] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000

                        [    0.310429] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000

                        [    0.310466] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000

                        [    0.310498] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000

                        [    0.310520] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100

                        [    0.310543] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000

                        [    0.310566] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100

                        [    0.310590] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000

                        [    0.310612] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000

                        [    0.310634] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000

                        [    0.310702] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)

                        [    0.311467] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)

                        [    0.312226] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)

                        [    0.312947] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)

                        [    0.313667] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)

                        [    0.314426] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

                        [    0.315453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.

                        [    0.316484] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)

                        [    0.319351] ACPI: Enabled 2 GPEs in block 00 to 3F

                        [    0.319678] ACPI: EC: GPE = 0x1e, I/O: command/status = 0x66, data = 0x62

                        [    0.319971] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none

                        [    0.320387] vgaarb: loaded

                        [    0.320616] vgaarb: bridge control possible 0000:04:00.0

                        [    0.320886] SCSI subsystem initialized

                        [    0.321126] ACPI: bus type USB registered

                        [    0.321363] usbcore: registered new interface driver usbfs

                        [    0.321599] usbcore: registered new interface driver hub

                        [    0.321843] usbcore: registered new device driver usb

                        [    0.322125] PCI: Using ACPI for IRQ routing

                        [    0.327780] PCI: pci_cache_line_size set to 64 bytes

                        [    0.327895] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]

                        [    0.327896] e820: reserve RAM buffer [mem 0xbc14b000-0xbfffffff]

                        [    0.327897] e820: reserve RAM buffer [mem 0xbd71d000-0xbfffffff]

                        [    0.327898] e820: reserve RAM buffer [mem 0xbdbdc000-0xbfffffff]

                        [    0.327899] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]

                        [    0.327965] NetLabel: Initializing

                        [    0.328192] NetLabel:  domain hash size = 128

                        [    0.328419] NetLabel:  protocols = UNLABELED CIPSOv4

                        [    0.328658] NetLabel:  unlabeled traffic allowed by default

                        [    0.328927] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0

                        [    0.329534] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

                        [    0.331784] Switching to clocksource hpet

                        [    0.336077] pnp: PnP ACPI init

                        [    0.336309] ACPI: bus type PNP registered

                        [    0.336593] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved

                        [    0.336824] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved

                        [    0.337072] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved

                        [    0.337302] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved

                        [    0.337531] system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved

                        [    0.337761] system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved

                        [    0.337991] system 00:00: [mem 0xfee00000-0xfeefffff] has been reserved

                        [    0.338236] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

                        [    0.338308] system 00:01: [io  0x0290-0x029f] has been reserved

                        [    0.338539] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

                        [    0.338546] pnp 00:02: [dma 4]

                        [    0.338553] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

                        [    0.338569] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

                        [    0.338580] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)

                        [    0.338618] system 00:05: [io  0x04d0-0x04d1] has been reserved

                        [    0.338849] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

                        [    0.338864] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)

                        [    0.339070] system 00:07: [io  0x0400-0x0453] could not be reserved

                        [    0.339300] system 00:07: [io  0x0458-0x047f] has been reserved

                        [    0.339529] system 00:07: [io  0x1180-0x119f] has been reserved

                        [    0.339758] system 00:07: [io  0x0500-0x057f] has been reserved

                        [    0.339987] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved

                        [    0.340235] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved

                        [    0.340466] system 00:07: [mem 0xff000000-0xffffffff] has been reserved

                        [    0.340696] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)

                        [    0.340740] system 00:08: [io  0x0454-0x0457] has been reserved

                        [    0.340970] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)

                        [    0.341056] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)

                        [    0.341199] pnp: PnP ACPI: found 10 devices

                        [    0.341426] ACPI: bus type PNP unregistered

                        [    0.347034] pci 0000:00:01.0: PCI bridge to [bus 03]

                        [    0.347289] pci 0000:00:01.1: PCI bridge to [bus 04]

                        [    0.347518] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]

                        [    0.347750] pci 0000:00:01.1:   bridge window [mem 0xfa000000-0xfb0fffff]

                        [    0.347981] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]

                        [    0.348413] pci 0000:00:02.0: PCI bridge to [bus 01]

                        [    0.348644] pci 0000:00:02.0:   bridge window [mem 0xfb100000-0xfb2fffff]

                        [    0.348875] pci 0000:00:02.0:   bridge window [mem 0xd2800000-0xd2ffffff 64bit pref]

                        [    0.349307] pci 0000:00:03.0: PCI bridge to [bus 02]

                        [    0.349541] pci 0000:00:11.0: PCI bridge to [bus 05]

                        [    0.349778] pci 0000:00:1c.0: PCI bridge to [bus 06]

                        [    0.350014] pci 0000:00:1c.2: PCI bridge to [bus 07]

                        [    0.350253] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]

                        [    0.350485] pci 0000:00:1c.2:   bridge window [mem 0xfb600000-0xfb6fffff]

                        [    0.350720] pci 0000:00:1c.4: PCI bridge to [bus 08]

                        [    0.350951] pci 0000:00:1c.4:   bridge window [mem 0xfb500000-0xfb5fffff]

                        [    0.351202] pci 0000:00:1c.5: PCI bridge to [bus 09]

                        [    0.351433] pci 0000:00:1c.5:   bridge window [mem 0xfb400000-0xfb4fffff]

                        [    0.351668] pci 0000:00:1c.7: PCI bridge to [bus 0a]

                        [    0.351897] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]

                        [    0.352143] pci 0000:00:1c.7:   bridge window [mem 0xfb300000-0xfb3fffff]

                        [    0.352378] pci 0000:00:1e.0: PCI bridge to [bus 0b]

                        [    0.352613] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]

                        [    0.352615] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]

                        [    0.352616] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]

                        [    0.352617] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]

                        [    0.352618] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]

                        [    0.352619] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]

                        [    0.352620] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfbffffff]

                        [    0.352621] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]

                        [    0.352622] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfb0fffff]

                        [    0.352623] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]

                        [    0.352624] pci_bus 0000:01: resource 1 [mem 0xfb100000-0xfb2fffff]

                        [    0.352625] pci_bus 0000:01: resource 2 [mem 0xd2800000-0xd2ffffff 64bit pref]

                        [    0.352626] pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]

                        [    0.352627] pci_bus 0000:07: resource 1 [mem 0xfb600000-0xfb6fffff]

                        [    0.352628] pci_bus 0000:08: resource 1 [mem 0xfb500000-0xfb5fffff]

                        [    0.352629] pci_bus 0000:09: resource 1 [mem 0xfb400000-0xfb4fffff]

                        [    0.352630] pci_bus 0000:0a: resource 0 [io  0xc000-0xcfff]

                        [    0.352631] pci_bus 0000:0a: resource 1 [mem 0xfb300000-0xfb3fffff]

                        [    0.352632] pci_bus 0000:0b: resource 4 [io  0x0000-0x03af]

                        [    0.352633] pci_bus 0000:0b: resource 5 [io  0x03e0-0x0cf7]

                        [    0.352634] pci_bus 0000:0b: resource 6 [io  0x03b0-0x03df]

                        [    0.352635] pci_bus 0000:0b: resource 7 [io  0x0d00-0xffff]

                        [    0.352636] pci_bus 0000:0b: resource 8 [mem 0x000a0000-0x000bffff]

                        [    0.352637] pci_bus 0000:0b: resource 9 [mem 0x000c0000-0x000dffff]

                        [    0.352638] pci_bus 0000:0b: resource 10 [mem 0xc0000000-0xfbffffff]

                        [    0.352658] NET: Registered protocol family 2

                        [    0.352986] TCP established hash table entries: 65536 (order: 7, 524288 bytes)

                        [    0.353641] TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)

                        [    0.354470] TCP: Hash tables configured (established 65536 bind 65536)

                        [    0.354713] TCP: reno registered

                        [    0.354964] UDP hash table entries: 4096 (order: 7, 524288 bytes)

                        [    0.355317] UDP-Lite hash table entries: 4096 (order: 7, 524288 bytes)

                        [    0.355675] NET: Registered protocol family 1

                        [    0.387174] pci 0000:04:00.0: Boot video device

                        [    0.387433] PCI: CLS 64 bytes, default 64

                        [    0.387473] Unpacking initramfs...

                        [    0.557067] Freeing initrd memory: 16556k freed

                        [    0.559292] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

                        [    0.559525] software IO TLB [mem 0xb814b000-0xbc14b000] (64MB) mapped at [ffff8800b814b000-ffff8800bc14afff]

                        [    0.560246] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer

                        [    0.560874] microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560877] microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560880] microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560882] microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560885] microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560888] microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x428

                        [    0.560902] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

                        [    0.567439] futex hash table entries: 2048 (order: 6, 262144 bytes)

                        [    0.567710] Initialise system trusted keyring

                        [    0.583764] HugeTLB registered 2 MB page size, pre-allocated 0 pages

                        [    0.584599] zbud: loaded

                        [    0.584942] VFS: Disk quotas dquot_6.5.2

                        [    0.585184] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

                        [    0.585533] msgmni has been set to 15524

                        [    0.585796] Key type big_key registered

                        [    0.586024] SELinux:  Registering netfilter hooks

                        [    0.586554] NET: Registered protocol family 38

                        [    0.586787] Key type asymmetric registered

                        [    0.587016] Asymmetric key parser 'x509' registered

                        [    0.587276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

                        [    0.587706] io scheduler noop registered

                        [    0.587934] io scheduler deadline registered (default)

                        [    0.588173] io scheduler cfq registered

                        [    0.589315] ioapic: probe of 0000:00:05.4 failed with error -22

                        [    0.589552] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

                        [    0.589789] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

                        [    0.590119] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0

                        [    0.590558] ACPI: Power Button [PWRB]

                        [    0.590811] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

                        [    0.591222] ACPI: Power Button [PWRF]

                        [    0.591499] ACPI: Requesting acpi_cpufreq

                        [    0.596272] GHES: HEST is not enabled!

                        [    0.596529] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

                        [    0.597070] Non-volatile memory driver v1.3

                        [    0.597322] Linux agpgart interface v0.103

                        [    0.597627] crash memory driver: version 1.1

                        [    0.597873] rdac: device handler registered

                        [    0.598115] hp_sw: device handler registered

                        [    0.598361] emc: device handler registered

                        [    0.598588] alua: device handler registered

                        [    0.598833] libphy: Fixed MDIO Bus: probed

                        [    0.599084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

                        [    0.599334] ehci-pci: EHCI PCI platform driver

                        [    0.599644] ehci-pci 0000:00:1a.0: EHCI Host Controller

                        [    0.599891] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

                        [    0.600328] ehci-pci 0000:00:1a.0: debug port 2

                        [    0.604460] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported

                        [    0.604481] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfb723000

                        [    0.610282] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

                        [    0.610543] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

                        [    0.610773] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.611184] usb usb1: Product: EHCI Host Controller

                        [    0.611430] usb usb1: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 ehci_hcd

                        [    0.611843] usb usb1: SerialNumber: 0000:00:1a.0

                        [    0.612136] hub 1-0:1.0: USB hub found

                        [    0.612385] hub 1-0:1.0: 2 ports detected

                        [    0.612740] ehci-pci 0000:00:1d.0: EHCI Host Controller

                        [    0.612989] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

                        [    0.613427] ehci-pci 0000:00:1d.0: debug port 2

                        [    0.617564] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported

                        [    0.617577] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb722000

                        [    0.623295] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

                        [    0.623552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

                        [    0.623782] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.624193] usb usb2: Product: EHCI Host Controller

                        [    0.624441] usb usb2: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 ehci_hcd

                        [    0.624854] usb usb2: SerialNumber: 0000:00:1d.0

                        [    0.625139] hub 2-0:1.0: USB hub found

                        [    0.625383] hub 2-0:1.0: 2 ports detected

                        [    0.625679] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

                        [    0.625912] ohci-pci: OHCI PCI platform driver

                        [    0.626148] uhci_hcd: USB Universal Host Controller Interface driver

                        [    0.626449] xhci_hcd 0000:08:00.0: xHCI Host Controller

                        [    0.626697] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3

                        [    0.686559] xhci_hcd 0000:08:00.0: irq 64 for MSI/MSI-X

                        [    0.686562] xhci_hcd 0000:08:00.0: irq 65 for MSI/MSI-X

                        [    0.686565] xhci_hcd 0000:08:00.0: irq 66 for MSI/MSI-X

                        [    0.686567] xhci_hcd 0000:08:00.0: irq 67 for MSI/MSI-X

                        [    0.686570] xhci_hcd 0000:08:00.0: irq 68 for MSI/MSI-X

                        [    0.686572] xhci_hcd 0000:08:00.0: irq 69 for MSI/MSI-X

                        [    0.686574] xhci_hcd 0000:08:00.0: irq 70 for MSI/MSI-X

                        [    0.686734] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

                        [    0.686964] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.687392] usb usb3: Product: xHCI Host Controller

                        [    0.687620] usb usb3: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 xhci_hcd

                        [    0.688032] usb usb3: SerialNumber: 0000:08:00.0

                        [    0.688304] hub 3-0:1.0: USB hub found

                        [    0.688558] hub 3-0:1.0: 2 ports detected

                        [    0.688835] xhci_hcd 0000:08:00.0: xHCI Host Controller

                        [    0.689081] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4

                        [    0.689538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

                        [    0.689768] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.690179] usb usb4: Product: xHCI Host Controller

                        [    0.690419] usb usb4: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 xhci_hcd

                        [    0.690832] usb usb4: SerialNumber: 0000:08:00.0

                        [    0.691103] hub 4-0:1.0: USB hub found

                        [    0.691349] hub 4-0:1.0: 2 ports detected

                        [    0.695395] xhci_hcd 0000:09:00.0: xHCI Host Controller

                        [    0.695644] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 5

                        [    0.755496] xhci_hcd 0000:09:00.0: irq 71 for MSI/MSI-X

                        [    0.755499] xhci_hcd 0000:09:00.0: irq 72 for MSI/MSI-X

                        [    0.755502] xhci_hcd 0000:09:00.0: irq 73 for MSI/MSI-X

                        [    0.755504] xhci_hcd 0000:09:00.0: irq 74 for MSI/MSI-X

                        [    0.755506] xhci_hcd 0000:09:00.0: irq 75 for MSI/MSI-X

                        [    0.755508] xhci_hcd 0000:09:00.0: irq 76 for MSI/MSI-X

                        [    0.755511] xhci_hcd 0000:09:00.0: irq 77 for MSI/MSI-X

                        [    0.755667] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002

                        [    0.755898] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.756309] usb usb5: Product: xHCI Host Controller

                        [    0.756553] usb usb5: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 xhci_hcd

                        [    0.756965] usb usb5: SerialNumber: 0000:09:00.0

                        [    0.757234] hub 5-0:1.0: USB hub found

                        [    0.757479] hub 5-0:1.0: 2 ports detected

                        [    0.757754] xhci_hcd 0000:09:00.0: xHCI Host Controller

                        [    0.758000] xhci_hcd 0000:09:00.0: new USB bus registered, assigned bus number 6

                        [    0.758454] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003

                        [    0.758684] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

                        [    0.759094] usb usb6: Product: xHCI Host Controller

                        [    0.759323] usb usb6: Manufacturer: Linux 3.10.0-229.20.1.rt56.141.14.el7.centos.x86_64 xhci_hcd

                        [    0.759754] usb usb6: SerialNumber: 0000:09:00.0

                        [    0.760020] hub 6-0:1.0: USB hub found

                        [    0.760252] hub 6-0:1.0: 2 ports detected

                        [    0.765442] usbcore: registered new interface driver usbserial

                        [    0.765675] usbcore: registered new interface driver usbserial_generic

                        [    0.765908] usbserial: USB Serial support registered for generic

                        [    0.766153] i8042: PNP: No PS/2 controller found. Probing ports directly.

                        [    0.769039] serio: i8042 KBD port at 0x60,0x64 irq 1

                        [    0.769280] serio: i8042 AUX port at 0x60,0x64 irq 12

                        [    0.769552] mousedev: PS/2 mouse device common for all mice

                        [    0.769865] rtc_cmos 00:03: RTC can wake from S4

                        [    0.770186] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

                        [    0.770463] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

                        [    0.770904] Intel P-state driver initializing.

                        [    0.771140] Intel pstate controlling: cpu 0

                        [    0.771377] Intel pstate controlling: cpu 1

                        [    0.771630] Intel pstate controlling: cpu 2

                        [    0.771865] Intel pstate controlling: cpu 3

                        [    0.772100] Intel pstate controlling: cpu 4

                        [    0.772335] Intel pstate controlling: cpu 5

                        [    0.772668] cpuidle: using governor menu

                        [    0.773581] hidraw: raw HID events driver (C) Jiri Kosina

                        [    0.774018] usbcore: registered new interface driver usbhid

                        [    0.774272] usbhid: USB HID core driver

                        [    0.774681] drop_monitor: Initializing network drop monitor service

                        [    0.775087] TCP: cubic registered

                        [    0.775344] Initializing XFRM netlink socket

                        [    0.775634] IPv6: Loaded, but administratively disabled, reboot required to enable

                        [    0.776091] NET: Registered protocol family 17

                        [    0.776926] Loading compiled-in X.509 certificates

                        [    0.778891] Loaded X.509 cert 'Magrathea: Glacier signing key: f5f247df1d49b1b471ffe34e0cfc48ab505f4e16'

                        [    0.779371] registered taskstats version 1

                        [    0.782060] Key type trusted registered

                        [    0.784364] Key type encrypted registered

                        [    0.786603] IMA: No TPM chip found, activating TPM-bypass!

                        [    0.787784] rtc_cmos 00:03: setting system clock to 2015-11-30 07:26:02 UTC (1448868362)

                        [    0.789225] Freeing unused kernel memory: 1520k freed

                        [    0.792342] systemd[1]: Unknown kernel switch systemd.debug. Ignoring.

                        [    0.792609] systemd[1]: Supported kernel switches:

                        [    0.792846] systemd[1]: systemd.unit=UNIT                        Default unit to start

                        [    0.793269] systemd[1]: rd.systemd.unit=UNIT                     Default unit to start when run in initrd

                        [    0.793710] systemd[1]: systemd.dump_core=0|1                    Dump core on crash

                        [    0.794135] systemd[1]: systemd.crash_shell=0|1                  Run shell on crash

                        [    0.794578] systemd[1]: systemd.crash_chvt=N                     Change to VT #N on crash

                        [    0.795003] systemd[1]: systemd.confirm_spawn=0|1                Confirm every process spawn

                        [    0.795443] systemd[1]: systemd.show_status=0|1                  Show status updates on the console during bootup

                        [    0.795871] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null

                        [    0.800982] systemd[1]:                                          Log target

                        [    0.801220] systemd[1]: systemd.log_level=LEVEL                  Log level

                        [    0.801480] systemd[1]: systemd.log_color=0|1                    Highlight important log messages

                        [    0.801905] systemd[1]: systemd.log_location=0|1                 Include code location in log messages

                        [    0.802331] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console

                        [    0.802769] systemd[1]:                                          Set default log output for services

                        [    0.803203] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console

                        [    0.803646] systemd[1]:                                          Set default log error output for services

                        [    0.804072] systemd[1]: systemd.setenv=ASSIGNMENT                Set an environment variable for all spawned processes

                        [    0.805191] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)

                        [    0.805852] systemd[1]: Running in initial RAM disk.

                        [    0.807055] systemd[1]: Set hostname to <bot5>.

                        [    0.834112] systemd[1]: Expecting device dev-disk-by\x2duuid-15d7f351\x2d7fbf\x2d49b2\x2d89ea\x2df7cda0fe5fa4.device...

                        [    0.834966] systemd[1]: Starting -.slice.

                        [    0.835837] systemd[1]: Created slice -.slice.

                        [    0.836111] systemd[1]: Starting System Slice.

                        [    0.836905] systemd[1]: Created slice System Slice.

                        [    0.837175] systemd[1]: Starting Slices.

                        [    0.837917] systemd[1]: Reached target Slices.

                        [    0.838183] systemd[1]: Starting Timers.

                        [    0.838918] systemd[1]: Reached target Timers.

                        [    0.839184] systemd[1]: Starting Journal Socket.

                        [    0.839971] systemd[1]: Listening on Journal Socket.

                        [    0.840283] systemd[1]: Started dracut ask for additional cmdline parameters.

                        [    0.840695] systemd[1]: Starting dracut cmdline hook...

                        [    0.841627] systemd[1]: Starting Create list of required static device nodes for the current kernel...

                        [    0.842808] systemd[1]: Started Load Kernel Modules.

                        [    0.843054] systemd[1]: Starting Setup Virtual Console...

                        [    0.843932] systemd[1]: Starting Journal Service...

                        [    0.845346] systemd[1]: Started Journal Service.

                        [    0.914546] usb 1-1: new high-speed USB device number 2 using ehci-pci

                        [    0.921229] systemd-udevd[270]: starting version 208

                        [    0.981022] wmi: Mapper loaded

                        [    1.022192] pps_core: LinuxPPS API ver. 1 registered

                        [    1.022424] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

                        [    1.023456] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)

                        [    1.023716] mlx4_core: Initializing 0000:01:00.0

                        [    1.024312] PTP clock support registered

                        [    1.026122] [drm] Initialized drm 1.1.0 20060810

                        [    1.028373] libata version 3.00 loaded.

                        [    1.028829] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k

                        [    1.028991] usb 1-1: New USB device found, idVendor=8087, idProduct=0024

                        [    1.028992] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

                        [    1.029525] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.

                        [    1.029990] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

                        [    1.030424] e1000e 0000:00:19.0: irq 78 for MSI/MSI-X

                        [    1.031391] hub 1-1:1.0: USB hub found

                        [    1.031741] hub 1-1:1.0: 6 ports detected

                        [    1.049100] MXM: GUID detected in BIOS

                        [    1.049985] nouveau  [  DEVICE][0000:04:00.0] BOOT0  : 0x0a8280b1

                        [    1.050220] nouveau  [  DEVICE][0000:04:00.0] Chipset: GT218 (NVA8)

                        [    1.050456] nouveau  [  DEVICE][0000:04:00.0] Family : NV50

                        [    1.051236] nouveau  [   VBIOS][0000:04:00.0] checking PRAMIN for image...

                        [    1.114146] nouveau  [   VBIOS][0000:04:00.0] ... appears to be valid

                        [    1.114376] nouveau  [   VBIOS][0000:04:00.0] using image from PRAMIN

                        [    1.114670] nouveau  [   VBIOS][0000:04:00.0] BIT signature found

                        [    1.114919] nouveau  [   VBIOS][0000:04:00.0] version 70.18.70.00.06

                        [    1.115315] nouveau 0000:04:00.0: irq 79 for MSI/MSI-X

                        [    1.115321] nouveau  [     PMC][0000:04:00.0] MSI interrupts enabled

                        [    1.115585] nouveau  [     PFB][0000:04:00.0] RAM type: DDR3

                        [    1.115836] nouveau  [     PFB][0000:04:00.0] RAM size: 1024 MiB

                        [    1.116065] nouveau  [     PFB][0000:04:00.0]    ZCOMP: 960 tags

                        [    1.119125] nouveau  [    VOLT][0000:04:00.0] GPU voltage: 900000uv

                        [    1.137736] usb 2-1: new high-speed USB device number 2 using ehci-pci

                        [    1.252178] usb 2-1: New USB device found, idVendor=8087, idProduct=0024

                        [    1.252413] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

                        [    1.252842] hub 2-1:1.0: USB hub found

                        [    1.253177] hub 2-1:1.0: 8 ports detected

                        [    1.293352] e1000e 0000:00:19.0 eth0: registered PHC clock

                        [    1.293587] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d8:50:e6:c2:80:b0

                        [    1.294024] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection

                        [    1.294295] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF

                        [    1.294536] ahci 0000:00:1f.2: version 3.0

                        [    1.294686] ahci 0000:00:1f.2: irq 80 for MSI/MSI-X

                        [    1.294756] e1000e 0000:0a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode

                        [    1.294766] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode

                        [    1.294768] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst

                        [    1.296055] e1000e 0000:0a:00.0: irq 81 for MSI/MSI-X

                        [    1.296058] e1000e 0000:0a:00.0: irq 82 for MSI/MSI-X

                        [    1.296062] e1000e 0000:0a:00.0: irq 83 for MSI/MSI-X

                        [    1.304118] scsi host0: ahci

                        [    1.304431] scsi host1: ahci

                        [    1.304709] scsi host2: ahci

                        [    1.305010] scsi host3: ahci

                        [    1.305274] scsi host4: ahci

                        [    1.305538] scsi host5: ahci

                        [    1.305785] ata1: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721100 irq 80

                        [    1.306216] ata2: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721180 irq 80

                        [    1.306632] ata3: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721200 irq 80

                        [    1.307061] ata4: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721280 irq 80

                        [    1.307477] ata5: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721300 irq 80

                        [    1.307912] ata6: SATA max UDMA/133 abar m2048@0xfb721000 port 0xfb721380 irq 80

                        [    1.308410] ahci 0000:07:00.0: irq 84 for MSI/MSI-X

                        [    1.318952] ahci 0000:07:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode

                        [    1.319370] ahci 0000:07:00.0: flags: 64bit ncq pio

                        [    1.326729] scsi host6: ahci

                        [    1.327539] scsi host7: ahci

                        [    1.327834] scsi host8: ahci

                        [    1.328465] scsi host9: ahci

                        [    1.329151] scsi host10: ahci

                        [    1.329779] scsi host11: ahci

                        [    1.330074] scsi host12: ahci

                        [    1.330351] scsi host13: ahci

                        [    1.330605] ata7: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610100 irq 84

                        [    1.331042] ata8: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610180 irq 84

                        [    1.331470] ata9: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610200 irq 84

                        [    1.331901] ata10: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610280 irq 84

                        [    1.332320] ata11: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610300 irq 84

                        [    1.332737] ata12: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610380 irq 84

                        [    1.333173] ata13: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610400 irq 84

                        [    1.333590] ata14: SATA max UDMA/133 abar m2048@0xfb610000 port 0xfb610480 irq 84

                        [    1.399370] e1000e 0000:0a:00.0 eth1: registered PHC clock

                        [    1.399605] e1000e 0000:0a:00.0 eth1: (PCI Express:2.5GT/s:Width x1) d8:50:e6:c1:f3:92

                        [    1.400051] e1000e 0000:0a:00.0 eth1: Intel(R) PRO/1000 Network Connection

                        [    1.400392] e1000e 0000:0a:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF

                        [    1.528163] usb 2-1.5: new full-speed USB device number 3 using ehci-pci

                        [    1.562090] tsc: Refined TSC clocksource calibration: 3699.895 MHz

                        [    1.562325] Switching to clocksource tsc

                        [    1.613130] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

                        [    1.613388] ata3: SATA link down (SStatus 0 SControl 300)

                        [    1.613483] usb 2-1.5: New USB device found, idVendor=0557, idProduct=8021

                        [    1.613484] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0

                        [    1.613746] hub 2-1.5:1.0: USB hub found

                        [    1.613859] hub 2-1.5:1.0: 4 ports detected

                        [    1.614751] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)

                        [    1.614998] ata6: SATA link down (SStatus 0 SControl 300)

                        [    1.615252] ata5: SATA link down (SStatus 0 SControl 300)

                        [    1.615517] ata1.00: ATA-9: OCZ-VERTEX4, 1.5.1, max UDMA/133

                        [    1.615750] ata1.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

                        [    1.616174] ata2.00: supports DRM functions and may not be fully accessible

                        [    1.616429] ata2.00: ATA-9: Crucial_CT512M550SSD1, MU01, max UDMA/133

                        [    1.616662] ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

                        [    1.617105] ata1.00: configured for UDMA/133

                        [    1.617351] ata4: SATA link down (SStatus 0 SControl 300)

                        [    1.617396] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX4      1.5. PQ: 0 ANSI: 5

                        [    1.621589] ata2.00: supports DRM functions and may not be fully accessible

                        [    1.626093] ata2.00: configured for UDMA/133

                        [    1.626362] scsi 1:0:0:0: Direct-Access     ATA      Crucial_CT512M55 MU01 PQ: 0 ANSI: 5

                        [    1.641160] ata13: SATA link down (SStatus 0 SControl 300)

                        [    1.641418] ata8: SATA link down (SStatus 0 SControl 300)

                        [    1.641677] ata10: SATA link down (SStatus 0 SControl 300)

                        [    1.641939] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

                        [    1.642201] ata9: SATA link down (SStatus 0 SControl 300)

                        [    1.642459] ata12: SATA link down (SStatus 0 SControl 300)

                        [    1.642716] ata11: SATA link down (SStatus 0 SControl 300)

                        [    1.642959] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66

                        [    1.643224] ata7: SATA link down (SStatus 0 SControl 300)

                        [    1.643558] ata14.00: configured for UDMA/66

                        [    1.645303] scsi 13:0:0:0: Processor         Marvell  91xx Config      1.01 PQ: 0 ANSI: 5

                        [    1.657162] ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6

                        [    1.657395] ata14.00: irq_stat 0x40000001

                        [    1.657626] scsi 13:0:0:0: CDB:

                        [    1.657855] Inquiry: 12 01 00 00 ff 00

                        [    1.658427] ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in

                                 res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)

                        [    1.659223] ata14: hard resetting link

                        [    1.759256] nouveau  [  PTHERM][0000:04:00.0] FAN control: none / external

                        [    1.759490] nouveau  [  PTHERM][0000:04:00.0] fan management: automatic

                        [    1.759721] nouveau  [  PTHERM][0000:04:00.0] internal sensor: yes

                        [    1.759967] nouveau  [     CLK][0000:04:00.0] 0f: core 520 MHz shader 1230 MHz memory 600 MHz

                        [    1.760396] nouveau  [     CLK][0000:04:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz

                        [    1.760881] [TTM] Zone  kernel: Available graphics memory: 3975154 kiB

                        [    1.761111] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB

                        [    1.761345] [TTM] Initializing pool allocator

                        [    1.761574] [TTM] Initializing DMA pool allocator

                        [    1.761807] nouveau  [     DRM] VRAM: 1024 MiB

                        [    1.762034] nouveau  [     DRM] GART: 1048576 MiB

                        [    1.762267] nouveau  [     DRM] TMDS table version 2.0

                        [    1.762496] nouveau  [     DRM] DCB version 4.0

                        [    1.762723] nouveau  [     DRM] DCB outp 00: 01000302 00020030

                        [    1.762952] nouveau  [     DRM] DCB outp 01: 02000300 00000000

                        [    1.763181] nouveau  [     DRM] DCB outp 02: 02011362 00020010

                        [    1.763414] nouveau  [     DRM] DCB outp 03: 01022310 00000000

                        [    1.763643] nouveau  [     DRM] DCB conn 00: 00001030

                        [    1.763912] nouveau  [     DRM] DCB conn 01: 00002161

                        [    1.764181] nouveau  [     DRM] DCB conn 02: 00000200

                        [    1.782808] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).

                        [    1.783038] [drm] Driver supports precise vblank timestamp query.

                        [    1.803475] nouveau  [     DRM] MM: using COPY for buffer copies

                        [    1.876456] usb 2-1.5.1: new low-speed USB device number 4 using ehci-pci

                        [    1.878045] nouveau  [     DRM] allocated 1024x768 fb: 0x70000, bo ffff880218079800

                        [    1.878551] fbcon: nouveaufb (fb0) is primary device

                        [    1.936841] Console: switching to colour frame buffer device 128x48

                        [    1.938095] nouveau 0000:04:00.0: fb0: nouveaufb frame buffer device

                        [    1.938112] nouveau 0000:04:00.0: registered panic notifier

                        [    1.938129] [drm] Initialized nouveau 1.1.2 20120801 for 0000:04:00.0 on minor 0

                        [    1.966439] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

                        [    1.966699] ata14.00: configured for UDMA/66

                        [    1.966775] ata14: EH complete

                        [    1.975499] sd 0:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)

                        [    1.975530] sd 0:0:0:0: [sda] Write Protect is off

                        [    1.975534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

                        [    1.975547] sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/476 GiB)

                        [    1.975549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

                        [    1.975557] sd 1:0:0:0: [sdb] 4096-byte physical blocks

                        [    1.975585] sd 1:0:0:0: [sdb] Write Protect is off

                        [    1.975589] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

                        [    1.975597] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

                        [    1.975728]  sda: sda1

                        [    1.975849] sd 0:0:0:0: [sda] Attached SCSI disk

                        [    1.975864]  sdb: sdb1

                        [    1.975969] sd 1:0:0:0: [sdb] Attached SCSI disk

                        [    1.997536] md: bind<sda1>

                        [    1.999277] md: bind<sdb1>

                        [    2.001045] md: raid1 personality registered for level 1

                        [    2.001151] md/raid1:md0: active with 2 out of 2 mirrors

                        [    2.001219] created bitmap (4 pages) for device md0

                        [    2.001551] md0: bitmap initialized from disk: read 1 pages, set 0 of 7520 bits

                        [    2.015863] md0: detected capacity change from 0 to 504658591744

                        [    2.016131]  md0: unknown partition table

                        [    2.043725] usb 2-1.5.1: New USB device found, idVendor=0557, idProduct=2261

                        [    2.043817] usb 2-1.5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

                        [    2.043978] usb 2-1.5.1: Product: CS1708i V1.3.121

                        [    2.044413] usb 2-1.5.1: Manufacturer: ATEN International Co. Ltd

                        [    2.073710] input: ATEN International Co. Ltd CS1708i V1.3.121 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.0/input/input2

                        [    2.074055] hid-generic 0003:0557:2261.0001: input,hidraw0: USB HID v1.00 Keyboard [ATEN International Co. Ltd CS1708i V1.3.121] on usb-0000:00:1d.0-1.5.1/input0

                        [    2.101683] input: ATEN International Co. Ltd CS1708i V1.3.121 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.1/input/input3

                        [    2.102151] hid-generic 0003:0557:2261.0002: input,hidraw1: USB HID v1.00 Device [ATEN International Co. Ltd CS1708i V1.3.121] on usb-0000:00:1d.0-1.5.1/input1

                        [    2.122722] input: ATEN International Co. Ltd CS1708i V1.3.121 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.2/input/input4

                        [    2.123351] hid-generic 0003:0557:2261.0003: input,hidraw2: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1708i V1.3.121] on usb-0000:00:1d.0-1.5.1/input2

                        [    2.145488] input: ATEN International Co. Ltd CS1708i V1.3.121 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5.1/2-1.5.1:1.3/input/input5

                        [    2.146235] hid-generic 0003:0557:2261.0004: input,hidraw3: USB HID v1.10 Mouse [ATEN International Co. Ltd CS1708i V1.3.121] on usb-0000:00:1d.0-1.5.1/input3

                        [    9.391461] mlx4_core 0000:01:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s

                        [    9.391464] mlx4_core 0000:01:00.0: PCIe link width is x8, device supports x8

                        [    9.391557] mlx4_core 0000:01:00.0: irq 85 for MSI/MSI-X

                        [    9.391560] mlx4_core 0000:01:00.0: irq 86 for MSI/MSI-X

                        [    9.391562] mlx4_core 0000:01:00.0: irq 87 for MSI/MSI-X

                        [    9.391564] mlx4_core 0000:01:00.0: irq 88 for MSI/MSI-X

                        [    9.391566] mlx4_core 0000:01:00.0: irq 89 for MSI/MSI-X

                        [    9.391569] mlx4_core 0000:01:00.0: irq 90 for MSI/MSI-X

                        [    9.391571] mlx4_core 0000:01:00.0: irq 91 for MSI/MSI-X

                        [    9.391574] mlx4_core 0000:01:00.0: irq 92 for MSI/MSI-X

                        [    9.391576] mlx4_core 0000:01:00.0: irq 93 for MSI/MSI-X

                        [    9.391578] mlx4_core 0000:01:00.0: irq 94 for MSI/MSI-X

                        [    9.391581] mlx4_core 0000:01:00.0: irq 95 for MSI/MSI-X

                        [    9.391583] mlx4_core 0000:01:00.0: irq 96 for MSI/MSI-X

                        [    9.391585] mlx4_core 0000:01:00.0: irq 97 for MSI/MSI-X

                        [    9.391587] mlx4_core 0000:01:00.0: irq 98 for MSI/MSI-X

                        [    9.391589] mlx4_core 0000:01:00.0: irq 99 for MSI/MSI-X

                        [    9.391591] mlx4_core 0000:01:00.0: irq 100 for MSI/MSI-X

                        [    9.391593] mlx4_core 0000:01:00.0: irq 101 for MSI/MSI-X

                        [    9.391595] mlx4_core 0000:01:00.0: irq 102 for MSI/MSI-X

                        [    9.440806] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)

                        [    9.440917] mlx4_en 0000:01:00.0: registered PHC clock

                        [    9.440930] mlx4_en 0000:01:00.0: Activating port:1

                        [    9.441710] mlx4_en: eth2: Using 48 TX rings

                        [    9.441711] mlx4_en: eth2: Using 4 RX rings

                        [    9.441712] mlx4_en: eth2:   frag:0 - size:1518 prefix:0 align:0 stride:1536

                        [    9.441846] mlx4_en: eth2: Initializing port

                        [    9.471740] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

                        [    9.656649] systemd-journald[164]: Received SIGTERM

                        [    9.697112] SELinux:  Disabled at runtime.

                        [    9.697126] SELinux:  Unregistering netfilter hooks

                        [    9.744383] systemd[1]: Unknown kernel switch systemd.debug. Ignoring.

                        [    9.744386] systemd[1]: Supported kernel switches:

                        [    9.744387] systemd[1]: systemd.unit=UNIT                        Default unit to start

                        [    9.744388] systemd[1]: rd.systemd.unit=UNIT                     Default unit to start when run in initrd

                        [    9.744389] systemd[1]: systemd.dump_core=0|1                    Dump core on crash

                        [    9.744390] systemd[1]: systemd.crash_shell=0|1                  Run shell on crash

                        [    9.744391] systemd[1]: systemd.crash_chvt=N                     Change to VT #N on crash

                        [    9.744392] systemd[1]: systemd.confirm_spawn=0|1                Confirm every process spawn

                        [    9.744393] systemd[1]: systemd.show_status=0|1                  Show status updates on the console during bootup

                        [    9.744394] systemd[1]: systemd.log_target=console|kmsg|journal|journal-or-kmsg|syslog|syslog-or-kmsg|null

                        [    9.744395] systemd[1]:                                          Log target

                        [    9.744396] systemd[1]: systemd.log_level=LEVEL                  Log level

                        [    9.744397] systemd[1]: systemd.log_color=0|1                    Highlight important log messages

                        [    9.744398] systemd[1]: systemd.log_location=0|1                 Include code location in log messages

                        [    9.744399] systemd[1]: systemd.default_standard_output=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console

                        [    9.744400] systemd[1]:                                          Set default log output for services

                        [    9.744401] systemd[1]: systemd.default_standard_error=null|tty|syslog|syslog+console|kmsg|kmsg+console|journal|journal+console

                        [    9.744403] systemd[1]:                                          Set default log error output for services

                        [    9.744404] systemd[1]: systemd.setenv=ASSIGNMENT                Set an environment variable for all spawned processes

                        [    9.837798] EXT4-fs (md0): re-mounted. Opts: (null)

                        [    9.843749] knem: module verification failed: signature and/or required key missing - tainting kernel

                        [    9.843876] knem 1.1.2.90mlnx: initialized

                        [    9.851351] systemd-udevd[573]: starting version 208

                        [    9.863657] systemd-journald[543]: Received request to flush runtime journal from PID 1

                        [    9.976631] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

                        [    9.992559] mei_me 0000:00:16.0: irq 103 for MSI/MSI-X

                        [   10.006186] snd_hda_intel 0000:04:00.1: Disabling MSI

                        [   10.006192] snd_hda_intel 0000:04:00.1: Handle VGA-switcheroo audio client

                        [   10.012301] systemd-udevd[619]: renamed network interface eth2 to mlnx0

                        [   10.027623] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt

                        [   10.041658] mlx4_en: mlnx0:   frag:0 - size:1518 prefix:0 align:0 stride:1536

                        [   10.051837] 8021q: 802.1Q VLAN Support v1.8

                        [   10.063117] EDAC MC: Ver: 3.0.0

                        [   10.064333] 8021q: adding VLAN 0 to HW filter on device mlnx0

                        [   10.065058] EDAC sbridge: Seeking for: PCI ID 8086:0ea0

                        [   10.065064] EDAC sbridge: Seeking for: PCI ID 8086:0ea0

                        [   10.065065] EDAC sbridge: Seeking for: PCI ID 8086:0ea8

                        [   10.065068] EDAC sbridge: Seeking for: PCI ID 8086:0ea8

                        [   10.065069] EDAC sbridge: Seeking for: PCI ID 8086:0e71

                        [   10.065072] EDAC sbridge: Seeking for: PCI ID 8086:0e71

                        [   10.065073] EDAC sbridge: Seeking for: PCI ID 8086:0eaa

                        [   10.065076] EDAC sbridge: Seeking for: PCI ID 8086:0eaa

                        [   10.065077] EDAC sbridge: Seeking for: PCI ID 8086:0eab

                        [   10.065080] EDAC sbridge: Seeking for: PCI ID 8086:0eab

                        [   10.065081] EDAC sbridge: Seeking for: PCI ID 8086:0eac

                        [   10.065084] EDAC sbridge: Seeking for: PCI ID 8086:0eac

                        [   10.065086] EDAC sbridge: Seeking for: PCI ID 8086:0ead

                        [   10.065089] EDAC sbridge: Seeking for: PCI ID 8086:0ead

                        [   10.065090] EDAC sbridge: Seeking for: PCI ID 8086:0ec8

                        [   10.065093] EDAC sbridge: Seeking for: PCI ID 8086:0ec8

                        [   10.065094] EDAC sbridge: Seeking for: PCI ID 8086:0ec9

                        [   10.065097] EDAC sbridge: Seeking for: PCI ID 8086:0ec9

                        [   10.065098] EDAC sbridge: Seeking for: PCI ID 8086:0eca

                        [   10.065101] EDAC sbridge: Seeking for: PCI ID 8086:0eca

                        [   10.065101] EDAC sbridge: Seeking for: PCI ID 8086:0e60

                        [   10.065104] EDAC sbridge: Seeking for: PCI ID 8086:0e6a

                        [   10.065106] EDAC sbridge: Seeking for: PCI ID 8086:0e6b

                        [   10.065109] EDAC sbridge: Seeking for: PCI ID 8086:0eb8

                        [   10.065112] EDAC sbridge: Seeking for: PCI ID 8086:0ebc

                        [   10.065116] EDAC sbridge: ECC is disabled. Aborting

                        [   10.065117] EDAC sbridge: Couldn't find mci handler

                        [   10.068168] input: PC Speaker as /devices/platform/pcspkr/input/input6

                        [   10.075156] mlx4_en: mlnx0: Port link mode changed, restarting port...

                        [   10.123220] asus_wmi: ASUS WMI generic driver loaded

                        [   10.124657] asus_wmi: Initialization: 0x0

                        [   10.124669] asus_wmi: BIOS WMI version: 0.9

                        [   10.124688] asus_wmi: SFUN value: 0x0

                        [   10.125204] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7

                        [   10.125877] asus_wmi: Disabling ACPI video driver

                        [   10.131879] iTCO_vendor_support: vendor-support=0

                        [   10.133021] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11

                        [   10.133079] iTCO_wdt: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)

                        [   10.133505] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

                        [   10.155431] mlx4_en: mlnx0:   frag:0 - size:1518 prefix:0 align:0 stride:1536

                        [   10.303765] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card0/input8

                        [   10.303824] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card0/input9

                        [   10.303845] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card0/input10

                        [   10.303884] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:04:00.1/sound/card0/input11

                        [   10.320297] mlx4_en: mlnx0: Close port called

                        [   10.404791] mlx4_en 0000:01:00.0: removed PHC

                        [   10.467934] AES CTR mode by8 optimization enabled

                        [   10.474723] ip_tables: (C) 2000-2006 Netfilter Core Team

                        [   10.498177] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

                        [   10.508724] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)

                        [   10.525440] alg: No test for crc32 (crc32-pclmul)

                        [   10.756007] e1000e 0000:00:19.0: irq 78 for MSI/MSI-X

                        [   10.856992] e1000e 0000:00:19.0: irq 78 for MSI/MSI-X

                        [   11.181793] 8021q: adding VLAN 0 to HW filter on device eth1

                        [   12.523743] Compat-mlnx-ofed backport release: 9032737

                        [   12.523746] Backport based on mlnx_ofed/mlnx_rdma.git 9032737

                        [   12.523746] compat.git: mlnx_ofed/mlnx_rdma.git

                        [   12.524814] mlx4_core: Mellanox ConnectX core driver v3.1-1.0.3 (29 Sep 2015)

                        [   12.524824] mlx4_core: Initializing 0000:01:00.0

                        [   13.599353] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx

                        [   13.637443] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None

                        [   19.317215] mlx4_core: device is working in RoCE mode: Roce V1

                        [   19.317218] mlx4_core: gid_type 1 for UD QPs is not supported by the devicegid_type 0 was chosen instead

                        [   19.317218] mlx4_core: UD QP Gid type is: V1

                        [   20.629293] mlx4_core 0000:01:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s

                        [   20.629294] mlx4_core 0000:01:00.0: PCIe link width is x8, device supports x8

                        [   20.629664] mlx4_core 0000:01:00.0: irq 85 for MSI/MSI-X

                        [   20.629666] mlx4_core 0000:01:00.0: irq 86 for MSI/MSI-X

                        [   20.629669] mlx4_core 0000:01:00.0: irq 87 for MSI/MSI-X

                        [   20.629671] mlx4_core 0000:01:00.0: irq 88 for MSI/MSI-X

                        [   20.629674] mlx4_core 0000:01:00.0: irq 89 for MSI/MSI-X

                        [   20.629676] mlx4_core 0000:01:00.0: irq 90 for MSI/MSI-X

                        [   20.629678] mlx4_core 0000:01:00.0: irq 91 for MSI/MSI-X

                        [   20.629681] mlx4_core 0000:01:00.0: irq 92 for MSI/MSI-X

                        [   20.629683] mlx4_core 0000:01:00.0: irq 93 for MSI/MSI-X

                        [   20.629685] mlx4_core 0000:01:00.0: irq 94 for MSI/MSI-X

                        [   20.629688] mlx4_core 0000:01:00.0: irq 95 for MSI/MSI-X

                        [   20.629690] mlx4_core 0000:01:00.0: irq 96 for MSI/MSI-X

                        [   20.629692] mlx4_core 0000:01:00.0: irq 97 for MSI/MSI-X

                        [   20.660780] mlx4_en: Mellanox ConnectX HCA Ethernet driver v3.1-1.0.3 (29 Sep 2015)

                        [   20.660901] mlx4_en 0000:01:00.0: registered PHC clock

                        [   20.660918] mlx4_en 0000:01:00.0: Activating port:1

                        [   20.668281] mlx4_en: 0000:01:00.0: Port 1: Using 48 TX rings

                        [   20.668283] mlx4_en: 0000:01:00.0: Port 1: Using 4 RX rings

                        [   20.668284] mlx4_en: 0000:01:00.0: Port 1:   frag:0 - size:1522 prefix:0 stride:1536

                        [   22.670230] mlx4_en: 0000:01:00.0: Port 1: Initializing port

                        [   22.670730] <mlx4_ib> mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v3.1-1.0.3 (29 Sep 2015)

                        [   22.671138] mlx4_core 0000:01:00.0: mlx4_ib_add: allocated counter index 1 for port 1

                        [   22.671139] mlx4_core 0000:01:00.0: mlx4_ib_add: allocated counter index 3 for port 2

                        [   22.685041] systemd-udevd[2037]: renamed network interface eth2 to mlnx0

                        [   22.708674] mlx4_en: mlnx0:   frag:0 - size:1522 prefix:0 stride:1536

                        [   22.745210] 8021q: adding VLAN 0 to HW filter on device mlnx0

                        [   22.747530] mlx4_en: mlnx0: Close port called

                        [   22.846459] mlx4_en 0000:01:00.0: removed PHC

                        [   22.850609] mlx4_en 0000:01:00.0: registered PHC clock

                        [   22.850622] mlx4_en 0000:01:00.0: Activating port:1

                        [   22.857947] mlx4_en: 0000:01:00.0: Port 1: Using 48 TX rings

                        [   22.857948] mlx4_en: 0000:01:00.0: Port 1: Using 4 RX rings

                        [   22.857950] mlx4_en: 0000:01:00.0: Port 1:   frag:0 - size:1522 prefix:0 stride:1536

                        [   22.858093] mlx4_en: 0000:01:00.0: Port 1: Initializing port

                        [   22.858581] mlx4_en 0000:01:00.0: Activating port:2

                        [   22.859204] mlx4_en: 0000:01:00.0: Port 2: Using 48 TX rings

                        [   22.859205] mlx4_en: 0000:01:00.0: Port 2: Using 4 RX rings

                        [   22.859206] mlx4_en: 0000:01:00.0: Port 2:   frag:0 - size:1522 prefix:0 stride:1536

                        [   22.859307] mlx4_en: 0000:01:00.0: Port 2: Initializing port

                        [   22.866877] mlx4_core 0000:01:00.0: mlx4_ib_add: allocated counter index 1 for port 1

                        [   22.866878] mlx4_core 0000:01:00.0: mlx4_ib_add: allocated counter index 3 for port 2

                        [   22.881221] systemd-udevd[2037]: renamed network interface eth2 to mlnx0

                        [   22.888233] systemd-udevd[2040]: renamed network interface eth3 to mlnx1

                        [   22.903387] mlx4_en: mlnx0:   frag:0 - size:1522 prefix:0 stride:1536

                        [   22.936576] 8021q: adding VLAN 0 to HW filter on device mlnx0

                        [   22.939100] mlx4_en: mlnx0: Setting Speed to 10000

                        [   22.939198] mlx4_en: mlnx0: Port link mode changed, restarting port...

                        [   23.020408] mlx4_en: mlnx0:   frag:0 - size:1522 prefix:0 stride:1536

                        [   26.177925] mlx4_en: mlnx0: Link Up

                        [   43.950996] mlx4_en: mlnx0: Setting Speed to 10000

                        [  527.771115] mlx4_en: mlnx1:   frag:0 - size:1522 prefix:0 stride:1536

                        [  527.803512] 8021q: adding VLAN 0 to HW filter on device mlnx1

                         

                         

                         

                         

                        ofed_info -s

                        MLNX_OFED_LINUX-3.1-1.0.3:

                        ibv_devinfo

                        hca_id: mlx4_0

                          transport: InfiniBand (0)

                          fw_ver: 2.35.5100

                          node_guid: f452:1403:0022:a270

                          sys_image_guid: f452:1403:0022:a273

                          vendor_id: 0x02c9

                          vendor_part_id: 4099

                          hw_ver: 0x1

                          board_id: MT_1090120019

                          phys_port_cnt: 2

                          port: 1

                          state: PORT_ACTIVE (4)

                          max_mtu: 4096 (5)

                          active_mtu: 1024 (3)

                          sm_lid: 0

                          port_lid: 0

                          port_lmc: 0x00

                          link_layer: Ethernet

                         

                         

                          port: 2

                          state: PORT_DOWN (1)

                          max_mtu: 4096 (5)

                          active_mtu: 1024 (3)

                          sm_lid: 0

                          port_lid: 0

                          port_lmc: 0x00

                          link_layer: Ethernet