2 Replies Latest reply on Sep 12, 2015 9:51 PM by eddie.notz

    Grid Director 2012--The switch you've logged in is not the master SM Would you like to connect to the master SM switch?

    282655008@qq.com

      When I use SSH to log on to Director Grid 2012, it will make the following tips:

      "The switch you've logged in is not the master SM

      Would you like to connect to the master SM switch? [yes|no]"

      System version of the device is: "5.4.0 version"

      I check the SM status, the information is as follows:

      L:ISR2012-2c6c(config-sm)# sm-info show

      subnet manager info is:

      smName= ISR2012-2c6c

      port guid= 0008f10400402c6f

      topology= none

      active topology= none

      algorithm= balanced-routing

      active algorithm= balanced-routing

      sm KEY = 0000000000000000

      sm priority = 13

      actual-sm-priority = 13

      sm sweep interval (seconds)= 15

      sm verbosity mode = verbose

      sm topology verbosity  = none

      sm mads-pipeline = 16

      sm polling-retries = 3

      sm activity = 37946

      sm state = standby

      sm mode = enable

      sm LMC = 7

      sm hoq = 16

      sm slv = 3

      sm mopvl = vl0-14

      subnet-prefix = 0xfe80000000000000

      port-state-change-trap = enable

      bad ports mode = enable

      pm mode = enable

      grouping mode = enable

      sm low-lid-boundary = 1

      sm high-lid-boundary = 49151

      sm m_key seed =  0000000000000000 [0 disable]

      sm m_key lease period = 30 [sec]

      PS: the device is running, only use the IB cable to connect to the server's HCA card, how will the state of SM into Master state?

      If anyone has any suggestions, bother to send to my email: 282655008@qq.com, thank you!