5 Replies Latest reply on May 11, 2016 9:32 AM by danfibm

    Ethernet Switch: which MIB to read for learned unicast MAC addresses?

    danfibm

      Hi,

       

      I have a sx1036 EN switch (but will be getting 1710s soon)... with 3.4 OS.

       

         # snmpget -v2c -c private 10.0.128.85 SNMPv2-MIB::sysDescr.0

           SNMPv2-MIB::sysDescr.0 = STRING: Mellanox SX1036,MLNX-OS,SWvSX_3.4.0000

       

       

      What MIB should I be reading to get the mac address table (to learn the ports for dynamic unicast MACs)?  The OS user manual says the "dot1dTpFdbGroup and dot1dStaticGroup are not supported in the Bridge MIB, it is supported as a part of Q-Bridge-MIB."   But, then, under the Q-BRIDGE-MIB section in the manual, it says:  "The following SNMP tables are not supported: dot1qTpFdbTable (dynamic UC MAC addresses)"

       

      So, what MIB do I use to read the MAC address table (for learned unicast MAC addresses)?

       

      Many Thanks!

      Dan