You can find the user manual for this switch at the link below. On page 224 there is instruction on how to set the MTU. Hope this helps!
thank you for your effort to help. But unfortunately this doesn´t help. Both in the GUI and in the CLI you can only show the current MTU but you can not set.
Do you have another idea?
1 of 1 people found this helpful
it is quite an old switch and i am not sure if it supported the 4K MTU.
yes, it is quite an old switch... On page 224 there is instruction on how to view the MTU and below in table 23-5 is the following information:
Field Description Possible Values
... ... ...
MTU Maximum Transmission Units Range: 256 to 4096
So this must be supported...