1 Reply Latest reply on Jan 6, 2014 1:58 AM by rian

    Does ConnectX-3 support Amphenol's QSFP+  transceiver?

      I want to get cable info, all data of which aren't correct, when I plug AMPHENOL's QSFP+ transceiver in.

      But when I plug MOLEX's QSFP transceiver in, I can get the correct info.

       

      Send PacketReceive Packet

      ======== MAD_SMP_Direct_Routed ========

      MAD_Header_SMP_Direct_Routed:

      ======== MAD_Header_SMP_Direct_Routed ========

      Method : 0x1

      ClassVersion : 0x1

      MgmtClass : 0x81

      BaseVersion : 0x1

      HopCounter : 0x1

      HopPointer : 0x0

      Status : 0x0

      D : 0x0

      TID_Block_Element : 0x0000000000000041

      Rsv16 : 0x0

      AttributeID : 0xff60

      AttributeModifier : 0x00000002

      M_Key : 0x0000000000000000

      DrDLID : 0xffff

      DrSLID : 0xffff

      omit~~~~

      ======== SMP_CableInfo ========

      address : 0x80

      page_number : 0x0

      device_address : 0x50

      size : 0x28

      Reserved0 : 0x0

      Reserved1 : 0x0000000000000000

      Byte[ 0] : 0x31

      Byte[ 1] : 0x31

      Byte[ 2] : 0x31

      Byte[ 3] : 0x31

      Byte[ 4] : 0x31

      Byte[ 5] : 0x31

      Byte[ 6] : 0x31

      Byte[ 7] : 0x31

      Byte[ 8] : 0x31

      Byte[ 9] : 0x31

      omit~~~~